Minor Fix Update
-Fixed an issue where setting the automatic uncoupling device to the “Couple” position before coupling caused the train to become unable to proceed once the cars were mechanically connected.
*Correct procedure: the automatic uncoupling device should be set to the “Couple” position after the actual coupling takes place.
-When the automatic uncoupling device is set to either “Couple” or “Release,” it will now return to the “Drive” position after 5 seconds (spring-return type).
-Removed the ride-quality scoring that occurred at the moment of coupling.
-Fixed an issue where the “Door Hold Open” switch stopped functioning after coupling when “Forced Driver-Only Operation” was enabled.
-Door switch can now be assigned to a single key for opening/closing.
-Door switches can now be assigned to separate keys for left/right operation.
(Left/right is based on the direction of travel.)
*When using separate left/right keys, doors can currently be opened without inserting the door key.
-Fixed an issue where the sunshade did not move after coupling.
-Added a TimeTable folder next to the executable file.
It contains the timetable and diagram (same as those distributed on the website).
Original text(Japanese)
一部修正のアップデート
・連結前に自動解結装置を「連結」位置にして、車両が機械的に連結された時点で進行不能となる不具合を修正しました。
※ただし、正しい取り扱いとしては、自動解結装置を「連結」位置にするのは、実際に連結した後になります。
・自動解結装置を「連結」または「解放」位置にしたとき、5秒経つと「運転」位置に戻るようにしました。(ばね復帰タイプのため)
・連結の瞬間の乗り心地関係の採点をなくしました。
・強制ワンマン設定時、連結後に開保持SWが動作しなくなる不具合を修正しました。
・ドアスイッチの開閉を同一キーに割り当てても動作するようにしました
・ドアスイッチの開閉を左右別にキー割り当てできるようにしました。(左右は進行方向基準です。)
※左右別のキー操作で開扉する場合、現状鍵の差し込みをしなくてもドアが開くようにしています。
・連結後に遮光板が動かない不具合を修正しました。
・実行ファイルの場所にTimeTableフォルダを追加しました。中にスタフとダイヤグラム(ホームページで配布しているものと同じ)が入っています。
Комментарии 0
Гостевые никнеймы не подтверждают личность. Все комментарии проходят проверку владельцем сайта.
Обсуждение ещё не началось.