Поиск по STEAMB

Игры и программы по онлайну, скины по объёму продаж

Ничего не найдено

Попробуйте другое название или переключите категорию.

Меню

МодыСнаряжение

SPS Equipment

Положительные голоса95%275 голосов игроков
Подписчики23,2 тыс.23 199 в Steam Workshop
Размер файла444,39 МБЗагрузка через Steam
Обновление автора28 июн. 2025 г.Дата обновления материала

Изображение 1 из 55. Материалы автора из Steam Workshop.

Изображение 1 из 55
Установить через Steam

О материале

«SPS Equipment» — материал мастерской Arma 3. Моды Arma 3: территории, оружие, техника и оборудование для редактора. Для установки откройте оригинал в Steam Workshop, проверьте требования автора и подпишитесь. Совместимость с версией игры редакцией не проверена.

Описание автора

SPS Equipment

1.13.0 Added RMR options to the top of the EoTech Vudu 1-10 scopes. Unfortunately, I've not done this for the S&B 1-8 as they use different mount models (as the tube is a different size) which I didn't split to allow easy replacing the upper forward section for RMRs. (I.e. it would be a much bigger job to do this for the S&B scopes and I don't have time at the moment!)

1.12.0 Update to the EoTech items: Tan version of the Vudo 1-10 LPVO added (as that's now available from EoTech.) This is available with and without clip on night vision attachment. (As with earlier versions, ACE3 self interactions allow adding and removing the clip on NV) EXPS3 and G33 magnifier model and textures updated as well as adding the G45 magnifier. As with the earlier version, adding/removing the magnifier is possible with ACE3 self interactions. (This essentially allows swapping between magnifiers if both items are carried in the inventory.)

1.11.1 Minor update - glare off the 3D sights Eotech, Aimpoint etc.) under certain conditions should be improved with this update

1.11.0 EoTech Vudu 1-10 FFP with LE-5 MRAD reticle added. (AN/PVS-24LR config also included)

1.10.0 Schmidt and Bender 5-45x56 PMII High Power scope added with MSR2 reticule. ACE3 interactions available for adding/removing AN/PVS-24LR as with other appropriate scopes. NOTE: the 5-45x56 & AN/PVS-24LR uses asdg/CBA's 'long rail' so is only available on weapons with a long enough rail to mount it.

1.9.1 MSR2 reticles added for Schmidt and Bender PMII High Power 3-27x56 and Ultra Short 3-20x50

1.9.0 Schmidt and Bender 1.1-4x20 PM II Short Dot (with P3L reticule) added Geometry and shadow LOD of Schmidt and Bender PMII High Power 1.1-8 x 24mm improved Updated mounts of Schmidt and Bender PMII High Power 1.1-8 x 24mm and 3-27 x 56mm to latest geometry/textures

1.8.1 Slight improvement to RAL8000 texture hue/saturation on S&B scopes

1.8.0 Vortex Spitfire HD Gen II x5 added Black and Tan options with and without Trijicon RMR

1.7.0 Schmidt and Bender 3-20x50 Ultra Short added. All 3 factory colours are available with or without a Trijicon RMR. Additionally, versions with a AN/PVS-24LR are also available. (If using ACE3, this can be removed/added if there's space in inventory etc.) The Trijicon RMR is also available as a pistol attachment where appropriate..

1.6.0 EoTech and Aimpoint sights added with 50m zeros for subsonic ammunition. (If using ACE3, it is possible to change between the 200m and 50m zeros with a self interaction.) OSS 7.62mm suppressor repositioned slightly.

1.5.0 AN/PVS24-LR Clip-on Night Vision Devices added to Schmidt & Bender Sights. If using ACE3, self interacting and going to the equipment section will allow removal and addition of the AN/PVS24-LR to these high power sights. (I'm not fully happy with the textures yet so there may be smaller updates in the near future.)

V1.4.1 Minor update - Additional Schmidt and Bender PMII High Power 3-27 x 56 added without top mounted T1 sight. (RAL8000 & FDE textures) If using ACE3, some additional functionality added with EoTech EXPS3-2. (Primarily done as a test for future addons.)

V1.4.0 Altas BT46-17LW PSR Bipod added Some extension to CBA accessories added to allow the user to set the deployment height of the bipod. Note that to some degree, this is controlled by what you deploy on so the most noticeable effect is when doing this prone. (A big thanks to @Blueduckraider50 for the scripting support here.)

V1.3.1 OSS HX-QD Suppressor line added. 5.56K, 556 and 762TI variants are available in black and FDE

V1.3.0 EOTech EXPS3-2 added with G33 Magnifier

V1.2.1 Minor update - Additional Schmidt and Bender PMII High Power 3-27 x 56 added without top mounted T1 sight. (Black texture Only)

V1.2.0 LaRue LT660-HK mounts added for the Aimpoint T1 sights. Aimpoint 3xMAG added to Aimpoint T1 sights. Note the magnifier functionality is controlled by CBA settings. (Configure controls -> Configure Addons -> CBA Accessory Functions and set 'Next Optics State' to your preference e.g. Ctrl+Sec. Mouse Button.)

V1.1.1 Minor improvement to the vertical position of the High Power scopes

V1.1.0 Aimpoint Micro T-1s added as stand alone sights

V1.0.0 First Release

SPS Equipment is currently a small accessories pack containing the following: OSS Helix 5.56mm and 7.62mm Suppressors Gemtech One 7.62mm Suppressors Gemtech Shield 5.56mm Suppressors

Schmidt and Bender PMII High Power 1.1-8 x 24mm Sights Schmidt and Bender PMII High Power 3-27 x 56mm Sights with top mounted Aimpoint MicroT1

The weapons in the images above can be found at the following location: https://steamcommunity.com/sharedfiles/filedetails/?id=1069692316 JPC Vests seen in these images can now be found at the following location: https://steamcommunity.com/sharedfiles/filedetails/?id=1109528858

Thanks go to: BI for making the game we all love The ARMA3 community on discord – especially da12thMonkey, commy2, HorribleGoat, X3KJ, Mondkalb, PuFu, (and any others I’ve forgotten to mention) Blueduckraider50 for his scripting help Bones for his wisdom Crazy for helping me (start to) get my head round config files Mikero for his tools All the other great mod maker in the community who have helped give me the inspiration to attempt to mod myself. In association with UK Special Forces Group http://specialforcesgroup.co.uk/ (Formerly 161st Reconnaissance Regiment)

Оригинал в Steam Workshop

Как установить и запустить

Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.

Настройки cookies

Вы можете изменить выбор в любой момент. Отказ от аналитики не ограничивает доступ к сайту.

Технологии, провайдеры и сроки хранения