Поиск по STEAMB

Игры и программы по онлайну, скины по объёму продаж

Ничего не найдено

Попробуйте другое название или переключите категорию.

Меню

JB's Bugs In Lights [B42]

Положительные голоса99%996 голосов игроков
Подписчики160,1 тыс.160 111 в Steam Workshop
Размер файла1,31 МБЗагрузка через Steam
Обновление автора1 сент. 2026 г.Дата обновления материала

Изображение 1 из 2. Материалы автора из Steam Workshop.

Изображение 1 из 2
Установить через Steam

О материале

«JB's Bugs In Lights [B42]» — материал мастерской Project Zomboid. Карты, транспорт, оружие и моды для выживания. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.

Описание автора

Project Zomboid Needs More Bugs

  • Spawn real-time rendered bugs around outdoor lights

  • Bugs are active in the summer months

  • Bugs are most active when it's warm and not raining

  • Bugs are attracted to active light sources

  • Mod Options control the number and size of bugs

  • Mod Option to toggle if bugs are active all year

  • Mod Option to turn off temperature and rain limited spawn rates

  • Mod Option so bugs can spawn both day and night

  • Includes an "addBug™ function" to add your own bugs

  • Safe to add at any time or remove, but why?

  • For B42 SP & MP

Check out JB's Fireflies for even more bugs!


Adding your own bugs

model: This is the name of the 3D item model used for the bug, like "Base.Plushabug"

size: This determines the scale of the 3D item. 1.0 represents the full size of the item, a good range would be 0.05 to 0.8 for bugs

speed: This sets the base velocity applied to the bug during movement. A good range is 0.0001 to 0.01, since higher values can cause the bug to move too fast to see

yawOffset: This is a degree adjustment used to ensure the "front" of your 3D model faces the actual direction of travel. The range is 0 to 360, and typical values are 0, 90 or 180 depending on how the model was exported

crazyFactor: This controls the amount of random "jitter" or "crazy"" added to the bug's velocity every frame. A good range is 0.00001 to 0.02; higher values create frantic, crack-head movement, while lower values looks like a steady drift

lightAttraction: This is how strongly the bug is "pulled" toward the light source. A range of 0.001 to 0.5 is good. Higher values make the bugs stick too close to the light source

areaOfInterest: This is the radius in squares/tiles around the light source where the bug will spend its life. A good range is 0.1 to 1.5

minFrames and maxFrames: This defines the lifespan of a single bug instance in update ticks before it despawns. A suitable range is 30 to 600, which is roughly 1 to 10 seconds of activity at 60 FPS

Example mod put in lua/client:

local BugPattern = require("jb_BugPatterns")
local bug = {
    model           = "Base.Plushabug",
    size            = 0.06,
    speed           = 0.001,
    yawOffset       = 90,
    crazyFactor     = 0.01,
    lightAttraction = 0.001,
    areaOfInterest  = 0.5,
    minFrames       = 180,
    maxFrames       = 600,
}

BugPattern.addBug(bug)


Workshop ID: 3717902500 Mod ID: JB_BugsInLights

Оригинал в Steam Workshop

Как установить и запустить

Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.

Настройки cookies

Вы можете изменить выбор в любой момент. Отказ от аналитики не ограничивает доступ к сайту.

Технологии, провайдеры и сроки хранения