Ambient City Lights SP & MP [B42.21]
Изображение 1 из 7. Материалы автора из Steam Workshop.
О материале
«Ambient City Lights SP & MP [B42.20]» — материал мастерской Project Zomboid. Карты, транспорт, оружие и моды для выживания. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.
Описание автора
Ambient City Lights
SINGLEPLAYER & MULTIPLAYER – BUILD 42.21
When the power grid goes down, the atmosphere of Knox Country's towns does not have to disappear with it, right?
What does the mod do?
Ambient City Lights preserves the nighttime atmosphere in towns after the power shuts down. Streetlights, illuminated signs, and supported outdoor lamps continue to light up the streets and make these places feel alive after dark.
Only the ambient city lighting is affected. Houses, appliances, fuel pumps, and all other electrical devices still require a proper power source.
Features
-
Streetlights and other fixed city lighting stay active at night after the power grid fails.
-
Supported outdoor lamps can still be switched on and off through the context menu, direct interaction, or a controller.
-
You can choose how many supported lights should remain available.
-
Every supported light has a very rare chance to flicker, dim, or go out for a while.
-
Optionally, more and more lights can fail over time.
-
Lamps powered by generators or batteries remain fully controlled by the base game.
-
Works in both singleplayer and multiplayer.
Sandbox Settings
The sandbox options let you decide how brightly your towns remain lit after the power grid fails and whether that lighting should slowly fade over time:
-
Active Lights (0–100%): Controls how many supported lights stay lit. At 100%, the full city lighting remains. Lower values create dark gaps and make the streets feel less perfectly maintained.
-
Flickering Lights: Every supported lamp has a very rare chance to develop a fault. Most only flicker briefly or become dimmer. In rare cases, a lamp may show warning signs and then remain dark for one to four in-game hours. Two neighboring lamps can occasionally be affected at the same time without turning a large town into one constant light show. Flickering can also be switched off completely.
-
Gradual Light Failures: Optionally allows more lights to fail after the power grid shuts down. You can choose whether the amount set under Lights Remaining is reached after 365, 180, or 90 in-game days. Set it to Off to keep the number of lights unchanged.
-
Lights Remaining: Sets how much city lighting will always remain despite the gradual failures. The preset value is 25%. It can never leave more lights working than the value chosen under Active Lights.
Which lights stay dark at a lower percentage is not rerolled every time you load the game. The selection stays the same in your save and is shared by every player in multiplayer.
Existing Saves & Multiplayer
The mod can be added to existing saves and servers. The save or server simply needs to be restarted normally after adding it.
If you enable gradual light failures for the first time in an older world, they only start counting from that moment. The age of the world and the original day of the power outage are never counted retroactively, so an older server will not suddenly lose most of its lighting.
If you switch gradual light failures off later, the lighting temporarily returns to the value chosen under Active Lights. Switch them back on and they continue from where they stopped. On multiplayer servers, these settings are shared by every player.
FAQ
Q: Is a failed light permanently broken? A: No. It has simply failed for Ambient City Lights and otherwise returns to normal base-game behavior. Regular grid power, a generator, or a battery can still power it if that fixture supports them.
Q: Can I repair failed lights? A: The mod does not add a separate repair system. Since the fixture itself is not destroyed, no special repair is needed.
Q: What happens during sleep or fast-forward? A: Flickering and gradual light failures follow in-game time. Sleeping and fast-forwarding move them ahead as well. Any flicker that would have happened during that time is simply skipped instead of being replayed afterward.
Compatibility Note
Ambient City Lights changes the light that supported outdoor fixtures cast into their surroundings. The lamp sprite itself can still appear dark or switched off after the power grid fails. Flickering also changes only the surrounding light, not the visible fixture.
Feel free to leave feedback in the comments.
Workshop ID: 3778621107 Mod ID: AmbientCityLights
Как установить и запустить
Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.