Project Dirtroad - Create your own dirt roads/paths through use [B42]
Фото и видео: 1 из 6. Материалы автора из Steam Workshop.
О материале
«Project Dirtroad - Create your own dirt roads/paths through use [B42]» — материал мастерской Project Zomboid. Карты, транспорт, оружие и моды для выживания. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.
Описание автора
Repeated vehicle, player, and optionally animal and zombie traffic gradually wears natural ground into persistent dirt roads and walking paths. These are also known as "desire paths", when people create unplanned trails naturally through repeated use for the shortest route.
Direct vehicle traffic will damage and "crush" bushes (and optionally, tall grasses) before destroying them, maintained roads/paths will suppress new bushes and saplings and can suppress grass regrowth, and abandoned routes slowly fade. The demo videos have Vehicle Wear set to the maximum for demonstration purposes only.
Build 42.21 required. Supports single-player and multiplayer.
Safe to add to existing saves and servers, but take a backup first. This mod uses the vanilla sprite and tile set, but adds moddata and generates sprite attachments. I don't recommend removing the mod, it will leave the paths behind. If you want them to go away, enable Cleanup / Uninstall Mode, and every area you visited will be cleaned up.
For bug reports, please open a discussion thread, describe it as fully as you can. If a screenshot might help please include.
Background
On the server I play on, we had a base at the Lakehouse / McCoy estate. Which sucks to get in and out of. So we lumberjacked our way to the road north for a faster exit. But then, the saplings grew. And then they grew on the vanilla dirt drive way too. And so this mod was born.
Options
Tune the mod to your liking:
-
Enable Vehicle Traffic - On by default. This allows vehicles to be tracked and generate wear and create paths.
-
Enable Player Foot Traffic - On by default. This allows players to be tracked and generate wear and create paths.
-
Enable Zombie Traffic - Off by default. This allows zombies to be tracked and generate wear and create paths, like players.
-
Enable Animal Traffic - Off by default. This allows animals to be tracked and generate wear and create paths, like players.
-
Vehicle Wear Rate - 1.0 by default. This controls how quickly vehicles will create a path. At 1.0, a vehicle must pass over a location 6 times before a visible path appears. At 0.5, it takes 12 passes. At 2.0, it takes 3. Ranges from 0.01 (600 passes) to 100.0 (Basically instant).
-
Foot Wear Rate - 1.0 by default. This controls how quickly players, zombies, and animals, will create a path. At 1.0, they must pass over a location 60 times before a visible path appears. At 0.5, it takes 120 passes. At 2.0, it takes 30. Ranges from 0.01 (6000 passes) to 100.0 (3 passes for a full path).
-
Wear Erosion - 1.0 by default. This controls how fast paths will erode and fade away. See tables below for more information. Setting it to 0 stops paths from eroding at all.
-
Vehicles Clear Bushes and Saplings - On by default. Vehicles are allowed to damage and destroy bushes and small saplings. The first hit damages the bush, the second destroys.
-
Vehicles Clear Grass - Off by default. Vehicles are allowed to destroy 2d tall grass, weeds and other ground vegetation. The first hit damages the grass, the second destroys. This removes the sound of driving over grass and makes for nicer looking roads, but it's a little more destructive so I left it off by default. This has nothing to do with changing grass squares into dirt squares, it's about the "Grass" you can remove with "Remove Grass".
-
Minimum Vehicle Speed - Default 2 km/h. A vehicle must be traveling this fast to create paths or damage bushes, saplings, grass, etc.
-
Overlay Sand - Off by default. Enable this to let PDR paths overlay sand. Leave it disabled to protect sand and floors tagged as Sand.
-
Invisible Paths - Off by default. Progressively removes all PDR path art while traffic, wear, erosion, and configured vegetation clearing continue. This is not instant: large loaded areas, especially on dedicated servers, may take time to reconcile, and center tiles can change before their blending edges and corners. Doesn't destroy any data, it simply hides the visual. Turning it back off will restore them.
-
Cleanup / Uninstall Mode - Off by default. Progressively stops every PDR feature and permanently removes PDR-owned art and data from encountered squares. This is not instant: large loaded areas, especially on dedicated servers, may take time to reconcile, and center tiles can disappear before their blending edges and corners. Turning it off resumes normal operation, but cleaned paths must form again.
-
Debug Logging - Off by default. Enable this only when gathering diagnostic information for a bug report.
-
Vehicle Sampling Frequency - 1.0 by default. This allows you to tune how frequently vehicles are sampled. 1.0 is once every 10 ticks, which is how PDR has worked from the beginning. In singleplayer, the default is usually plenty. Servers tend to have a lower tick rate, so if you want vehicles to have better tracking, especially at high speeds, increase this. At 2.0, it polls every 5 ticks. At 10.0, it polls every tick. Increasing this will use more server processing.
Erosion Rates
Roads and walking paths gradually lose wear when they are not being used. Wear Erosion ranges from 0.0 to 100.0. Higher values make tracks disappear faster; lower values preserve them longer. Zero pauses decay forever. Times below are measured in in-game days and assume the route receives no new traffic.
| Erosion Rate | One Early Layer | Fully Developed Route |
|---|---|---|
| 0.25 | 120 days | 600 days |
| 0.50 | 60 days | 300 days |
| 1.00 | 30 days | 150 days |
| 2.00 | 15 days | 75 days |
| 3.00 | 10 days | 50 days |
| 4.00 | 7.5 days | 37.5 days |
| 5.00 | 6 days | 30 days |
| 10.00 | 3 days | 15 days |
| 20.00 | 1.5 days | 7.5 days |
| 50.00 | 0.6 days | 3 days |
| 75.00 | 0.4 days | 2 days |
| 100.00 | 0.3 days | 1.5 days |
Any renewed traffic adds wear and can maintain or rebuild the route.
Translations
I include and maintain requested translations, especially those provided by the community. I use machine translation to fill gaps and welcome corrections from native speakers. Please find the discussion thread for each language to request updates.
- Italian (IT) translation by Nycotex.
Permissions
Ask for permission This mod can only be added to and extended with the express permission from the original creator. Having received permission, credit must be given to the original creator, both within the files of the mod and wherever the mod roams online. If no permission is received you may not alter the mod, and it must be treated as a mod that is 'On Lockdown'. http://theindiestone.com/forums/index.php/topic/2530-mod-permissions/?p=36478
Workshop/Mod ID
Workshop ID: 3782929173 Mod ID: ProjectDirtroad
Как установить и запустить
Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.