Reciprocating Saw MP
О материале
«Reciprocating Saw MP» — материал мастерской Teardown. Карты, транспорт, инструменты и моды Teardown. Для установки откройте оригинал в Steam Workshop, проверьте требования автора и подпишитесь. Совместимость с версией игры редакцией не проверена.
Описание автора
Reciprocating Saw MP
An old 1950s gas saw from RIGHT. The blade is a steel guide bar that holds steady, with a toothed strip underneath that shoots back and forth really fast. It cuts clean lines like the Handsaw does, one voxel at a time. The difference is you don't click for every stroke. You hold the trigger and it chews through on its own.
Starting it
Press R to pull the cord. Old engine, so it usually takes two or three pulls before it catches. Press X to switch it off.
Cutting
Hold LMB on whatever you want to cut. The blade bites in and goes deeper by itself until the piece falls off. Wood goes fast. Metal is a lot slower and throws sparks. Want to stop and come back later? Press E to pin the spot. Point back at your cut and it carries on from the same depth. You can move about a meter while you cut. Walk further than that and the saw lets go.
Free cut
Press V to switch to free cut. Now there's no straight line: wherever the running blade touches something it chews through it, like the DOOM chainsaw but thinner. The holes are the same size in everything, wood, concrete, metal, even heavy metal. Set how thick the cut is in the O menu. Press V again to go back to clean cuts.
Blade angle
Hold RMB and move the mouse left or right to tilt the blade. However the blade is tilted is how the cut runs. Upright cuts straight down and flat cuts across. It clicks in 15 degree steps, so cuts line up neatly with the object. Hold Shift while tilting to turn it freely instead.
Overheating
Run it too long and the engine gets hot. You'll see the exhaust smoke get darker and the housing start glowing orange. Keep going and it stalls. You have to let it cool before it'll start again.
Settings
Press O with the saw out. You can change how fast it cuts, how long each cut line is, how long it runs before overheating, the volume and the keys. Camera shake can be turned off there too.
Wood to cut
The sawing table and the planks are in the spawn menu under Reciprocating Saw MP. For trees, logs and stumps, get my Even Better Trees mod. Spawned trees stand rooted, and when you saw through the trunk the stump stays put.
Multiplayer
The server does all the cutting, so everyone sees the same cuts and the same pieces falling. Other players see your blade moving and your smoke, and they hear the saw from where you're standing. The running blade hurts players. The host can switch that off in the mod options. It can't be used from inside a vehicle. By TRTR. The blade tilt idea comes from KBD2's DOOM Chainsaw.
Как установить и запустить
Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.