Custom Vanilla Base Building
Фото и видео: 1 из 7. Материалы автора из Steam Workshop.
О материале
«Custom Vanilla Base Building» — материал мастерской DayZ. Оружие, транспорт, территории и моды для серверов. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.
Описание автора
Kryden Vanilla Base Building
A Kryden product.
Full 3D control over your base building — without leaving vanilla. Kryden Vanilla Base Building (KVBB) extends DayZ's construction system so you can rotate, tilt and raise your pieces exactly where you want, with a custom preview hologram and a clean HUD guiding every step.
Why it was made
Vanilla base building is rigid: pieces snap flat to the terrain, with no free rotation, no height adjustment, and they lock up on any slope. Anyone who has tried to close off a base on uneven ground knows the pain.
KVBB was built to fix that without breaking the feel of the game: the core is the same vanilla FenceKit, only now it obeys you — free rotation, height and angle. And for the cases where a piece ends up high or steeply angled, V1 adds the KVBB Stair: a dedicated item you place with the same 3D control and use to climb up and build. A lightweight mod, made to run smooth on any server.
What the mod does
-
Free 3D rotation — rotate in yaw, pitch and roll. Place fences tilted, on ramps, at any angle.
-
Height adjustment — raise and lower the piece freely, no longer stuck to the ground.
-
Toggleable snap — stick to the terrain when you want, float free when you don't.
-
Pin in place — lock the hologram and walk around it to check the angle before you build.
-
Precision mode — switch to fine rotation and height steps for millimeter-perfect finishing.
-
Custom 3D hologram — Kryden's own preview, with the option to fall back to the vanilla hologram whenever you want.
-
On-screen HUD — control legend and live values on screen while you place.
-
Place anywhere — without the vanilla angle/collision block getting in the way of placement.
-
Mouse-wheel rotation — adjust the active axis by scrolling the wheel, the way your hand already expects (the arrow keys still work too).
-
KVBB Stair — a dedicated item in two heights (1m and 2m) to climb up and build where a piece sits high or angled. A single kit places both: you switch the size before deploying, and fold it back with one action.
-
Gate reachable from farther away — with rotations pushing the piece out, opening/closing the fence gate no longer gets cut off by distance.
-
The kit comes back to you — when you build the fence base, the FenceKit drops at your feet instead of at a fixed point on the structure.
Version 1: FenceKit (full 3D control) + KVBB Stair. The Watchtower is on the roadmap.
Controls
-
R — cycle the active axis (yaw → pitch → roll → height)
-
← / → or Mouse Wheel — adjust the active axis
-
Shift + T — toggle ground snap on/off
-
Shift + X — pin/unpin the hologram in place
-
Shift + Z — toggle precision mode (fine step)
-
Build / Cancel — through vanilla's own deploy action (hold to build / Esc)
Stair (interaction-menu actions):
-
Toggle Stair Size — with the kit in hand (before placing), switch between 1m and 2m
-
Fold Stair — fold the stair back into the kit
Configuration — settings.json
The mod generates a configuration file automatically the first time it runs. You don't need to create anything by hand: join the game once with the mod enabled and the file appears with default values.
Where it lives: in the DayZ profile folder, under KrydenVanillaBaseBuilding\Config\settings.json. On the client it's usually Documents\DayZ, on the server, the folder passed in -profiles=. Deleted it? It gets recreated with defaults.
Full file (default values):
{
"useCustomHologram": 1,
"rotationStepDeg": 5.0,
"rotationStepFineDeg": 1.0,
"heightStepM": 0.25,
"heightStepFineM": 0.05,
"maxPlacementDistance": 8.0,
"fenceActionDistance": 4.0,
"stairFreeRotation": 1
}
A bool in Enforce Script is stored as 1 (on) or 0 (off).
Fields:
| Field | Default | What it does |
|---|---|---|
| useCustomHologram | 1 | 1 = use the mod's own 3D hologram (KVBB_Fence_Hologram). 0 = use DayZ's vanilla hologram. Turning it off removes nothing, it just goes back to the original preview. |
| rotationStepDeg | 5.0 | How many degrees the piece rotates per key press (yaw / pitch / roll), in normal mode. |
| rotationStepFineDeg | 1.0 | Rotation step in precision mode (toggled with Shift+Z). |
| heightStepM | 0.25 | How many meters the piece moves up/down per key press, in normal mode. |
| heightStepFineM | 0.05 | Height step in precision mode (Shift+Z). |
| maxPlacementDistance | 8.0 | Range, in meters, of the projection while it is floating (snap off). |
| fenceActionDistance | 4.0 | Range, in meters, to open/close the fence gate (vanilla is 2.0). Useful ceiling ~5.0 (cursor ray limit). Does not affect build/dismantle. |
| stairFreeRotation | 1 | 1 = the stair inherits the mod's free 3D rotation on deploy. 0 = vanilla placement (snaps to the terrain). Turn it off if there's stair-stacking abuse. |
Tips:
-
Edit with the game closed — the file is read on startup.
-
Use an editor that respects JSON (VS Code, Notepad++). A wrong comma or quote makes the file fail to load, in that case the mod uses the defaults.
-
Always use a decimal point in numbers (5.0, not 5,0).
Powered by c-Morette
Как установить и запустить
Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.