Large Airtight Hangar Module
Изображение 1 из 6. Материалы автора из Steam Workshop.
О материале
«Large Airtight Hangar Module» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.
Описание автора
Last picture = https://steamcommunity.com/sharedfiles/filedetails/?id=1629580155https://steamcommunity.com/sharedfiles/filedetails/?id=1629580155
BACKGROUND
Well I made this mainly for the fun of it. I was a bit tired of making ships and after being completely blown away by this creation that had a ton of cool features. I was really interestred in the airtight hangar and how it worked. This is not a super serous build but people seemed interested so why not share? Its up to you to configure it the way you want! By that, it set up to be as basic as possible.
Ship in pictures RWI Polar Bear
DATA: MAIN HANGAR
Main hangar volume 14 blocks in width 53 blocks in depth 13 blocks in height 10 x Airvents 8 x Spotlights hanging from the main doors. No connectors
DATA: FIGHTER HANGARS
The 16 fighter hangars 6x6 blocks in base 4 blocks in height 2x airvents per hangar
The main doors opens by triggering these timerblocks. Green to open, red closes. It works best on solid ground. The merge blocks are like magnets when within eatchers proximity and causes the whole multigrid to move along. Easily fixed by delaying the mergeblocks activation untill they nearly touch eatchother. As i stated earlier. Its up to you to edit these things to fit your needs.
A sensor is set to open and close for large or small grids. The large grid cant be too high as it might keep the door from closing due to the sensor range. Its easliy fixed by reducing the "back" value on the sensor.
PRO TIPS
Dont convert to station, but do ancor it to voxels (planets or asteroids). And keep the moving parts clear from voxels. Fave and like, is also recommended :P
BUILDING IN SURVIVAL
-
Spawn it first in creative mode with no block damage (You don’t need to turn block damage off, just in case) and have a look at how the rotor heads are orientated. (They have the notch mark at 0 degrees on all rotors they are connected to. So they are all set to 0 degrees when the doors are closed.
-
While in creative mode disconnect all rotors by pressing the disconnect button. Do this on all 8 rotors at the same time. Turn of the sensor.
-
Save 2 of the smaller grids that you disconnected. 2 grids that mirror each other.
-
Spawn this blueprint in survival. Build it up. You will get a warning saying that the sub grids won’t be projected or whatever. Ignore it and project it anyways. Make sure that the sensor will not detect any large or small grids as it will dissconnect the merge blocks that keeps the doors sealed. Or just turn it off.
-
Set a timer block to “Attach” all rotors and trigger it self each second. By Doing this you can build the door arms seperatly and fly it in with a smaller ship, hold it in place until it snaps to place. Be careful, it might throw your ship around if you come in at a bad angle. Use a landing gear to lift the pieces. When all four arms are attached, turn of the timer block that you set up earlier. You don’t need it when all 8 rotors have a rotor head attached.
Как установить и запустить
Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.