Поиск по STEAMB

Игры и программы по онлайну, скины по объёму продаж

Ничего не найдено

Попробуйте другое название или переключите категорию.

Меню

Чертежи

ISL - Bison-RN 967 Cargo Truck DECOMMISSIONED

Положительные голоса96%26 голосов игроков
Подписчики1,6 тыс.1 631 в Steam Workshop
Размер файла2,02 МБЗагрузка через Steam
Обновление автора23 июн. 2020 г.Дата обновления материала

Изображение 1 из 4. Материалы автора из Steam Workshop.

Изображение 1 из 4
Установить через Steam

О материале

«ISL - Bison-RN 967 Cargo Truck DECOMMISSIONED» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.

Описание автора

Purpose

An unarmed vehicle for transporting cargo, either manually or through autopilot.

Features

Tools, Scripts & Weapons: DAS - Driver Assisting System - Used to manage wheel settings, lights, gyro override and autopilot (read misc. section for how to set up autopilot).

Power: 2 batteries 2 hydrogen engines 1 hydrogen generator

Movement & Control: 1 Cockpit 1 remote control 6 wheels - 5x5 2 gyroscopes - managed by the DAS script

Cargo Space 2 large cargo containers 1 medium cargo container 1 connector - underside

Miscellaneous: 1 camera - underisde - for manual docking and DAS script 1 sensor - used in autopilot system 3 timer blocks - used in autopilot system Turing lights Stop Lights Reverse Lights Sound Block - back up beeper

Has an empty mass of 22598 kg

All Programmable blocks are turned off in this blueprint, to get them going again, just turn them back on. Each ship also has text panels on the sides to display a registration number.

All ships in this set have a rear mounted Merge block and can be printed using a welder wall with one (large grid) piston.

Using The Autopilot:

  • DAS comes with an autopilot feature that will follow waypoints set up in the Remote Control (like with the vanilla autopilot), however it will not perform any of the actions added there, and will only trigger a specific timer block on reaching each waypoint.

  • The sensor turns on the timer block (Bsn TB DAS Waypoint) when it detects a large ship or station under the vehicle, which means the script will only attempt to stop and dock at a waypoint if it detects that it is on a large ship or station, otherwise the vehicle will move through the waypoints without stopping.

  • The autopilot is set to a circle patrol route and moves very slowly (to allow enough time for the handbrake to stop the vehicle in time when docking).

  • To set up a delivery route, make sure you are controlling the vehicle from the remote control block (as this will be where the GPS markers will be taken from, and where the RC will aim for) and go through the route, taking markers as you go.

  • The DAS autopilot has no collision avoidance, so make sure you plan your route accordingly and include enough GPS markers to go around obstacles or impassable terrain.

  • Make sure that the only GPS markers on the route that go over large grid blocks are places where you want the vehicle to dock (unless you don't mind it waiting there, attempting to dock for a while).

  • To change the length of time the vehicle is docked for, simply adjust the count down on the timer labelled " Bsn TB Docked timer"

  • The "dock" should be set up as in the screenshots, with a connector in the floor surrounded by blast door blocks. When setting up the route, take the GPS with the connectors lined up. when in autopilot, the vehicle will turn on the handbrake at that point to stop, drop its suspension and attempt to lock the connectors.

Toolbars

Toolbar 1

  1. Set suspension to Low
  2. Set suspension to High
  3. Handbrake On/Off
  4. Autopilot Start/Stop
  5. Spotlights On/Off
  6. Connector Switch lock
  7. Merge Block On/Off

Toolbar 2

  1. Batteries Discharge
  2. Batteries Recharge
  3. H2 engines On/Off
  4. H2 Generator On/Off
  5. Antenna On/Off

Toolbar 6 1. 2. 3. 4. 5. Repair Projector On/Off

Оригинал в Steam Workshop

Как установить и запустить

Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.

Настройки cookies

Вы можете изменить выбор в любой момент. Отказ от аналитики не ограничивает доступ к сайту.

Технологии, провайдеры и сроки хранения