Поиск по STEAMB

Игры и программы по онлайну, скины по объёму продаж

Ничего не найдено

Попробуйте другое название или переключите категорию.

Меню

Скрипты

Simple cruise control

Положительные голоса98%489 голосов игроков
Подписчики10,9 тыс.10 913 в Steam Workshop
Размер файла45,66 КБЗагрузка через Steam
Обновление автора8 июн. 2019 г.Дата обновления материала

Изображение 1 из 5. Материалы автора из Steam Workshop.

Изображение 1 из 5
Установить через Steam

О материале

«Simple cruise control» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.

Описание автора

Simple cruise control

v 2.1.1 The script allows you to maintain a given longitudinal or vertical speed of the aircraft, controlling the engines in the corresponding axis. Displays speed information on the display. The W (or Spacebar) button no longer needs to be held permanently. Saves energy and fuel, spending it only to maintain speed.

To fly in cruise control mode, you need to turn on the mode and gain the desired speed. After releasing the buttons, the set speed on the selected axis will be maintained automatically, with gravity compensation. In this case, the speeds along the remaining axes are parried standardly by the inertia damper.

The mode can be switched on by quick triple pressing W or Spacebar, the desired speed will be set to 100 m/s and acceleration will begin. At any time, you can stop acceleration by pressing any button once - the gained speed will be maintained. To disable the mode, you can use a quick triple press S or C, while the standard inertia damper will turn on in the selected axis.

The arguments of the program block:

  • cc_on - enable mode

  • cc_off - off mode

  • cc_onoff - mode switching

  • axis_v - select vertical axis

  • axis_l - select the longitudinal axis (by default)

  • axis_switch - switching axis

  • setspeed NNN - sets the desired speed, where NNN is a number

By default, the mode is disabled.

The script can be controlled without running the PB with arguments at all, the PB can not be displayed on the function panel:

  • triple pressing W switches on the cruise control in the longitudinal axis and sets the desired speed to 100m/s

  • triple pressing S disables cruise control in the longitudinal axis

  • triple pressing Spacebar turns on the cruise control in the vertical axis and sets the desired speed to 100m/s vertically

  • triple pressing C turns off cruise control in the vertical axis

At the same time, the script works only in one axis.

Script settings are made through user PB data (the button "Custom data"). When you first start the script will generate the default settings. You will need to specify the name of the cockpit and display. After changing the settings, you must recompile the script. At first, go to Custom Data, change language and recompile, then continue setup.

Realized features:

Russian, English and German are supported, including in the comments to the settings. Display in text or graphic mode. There is a setting for the frequency of updating engines and graphics. Saved state between gaming sessions. When the W, S, Spacebat or C buttons are pressed, the engines are controlled as standard, without intercepting control, developing maximum power. If the maximum possible desired speed is set (100m/s) and the ship’s speed exceeds it, braking will not be applied. You can switch control between the longitudinal and vertical axes. You can prohibit the use of longitudinal or vertical axes in the settings. You can disable the use of quick triple-click in the settings, and manage the script through the launch of PB with arguments. You can set the desired speed with the "setspeed" command.

In the plans:

  • graphics adaptation for non-standard format displays

  • automatic detection of the current cockpit

  • separate control of atmospheric, hydrogen and ion engines, with the ability to enable or disable various groups of engines

  • wheel equipment management, wheels as a separate group of engines

Thanks Gamitech for translating the interface to German!

Оригинал в Steam Workshop

Как установить и запустить

Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.

Настройки cookies

Вы можете изменить выбор в любой момент. Отказ от аналитики не ограничивает доступ к сайту.

Технологии, провайдеры и сроки хранения