Helios C-80 Ripper
Изображение 1 из 7. Материалы автора из Steam Workshop.
О материале
«Helios C-80 Ripper» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.
Описание автора
[Vanilla|Survival Ready|No Subgrids]
A simple gatling gun to attach to large (and small) grid ships via a connector.
The C-80 Ripper is the big brother of the C-30 & C-50. With its 8 gatling guns it can rip almost any ship apart and when properly aligned (thanks to the connector mount), all of these guns mounted on your ship will shoot at the exact same spot, devastating everything in their path.
-fully conveyored -attached via connector -no scripts needed
Some stats:
-Blocks: 56 -PCU: 1045 -Mass: 4.8 t -8 gatling guns
How to use:
-Build a connector on your ship (leave some space for the gatling gun) -Paste in/ project&weld this blueprint -Move it close to the ships connector, so that both glow yellow (easiest with a tugboat) -Nudge it around to align the rotation (either with jetpack or tugboat) -Open the terminal of the gatling gun and start the timer (connectors then lock automatically&permanently) -To shoot simply move the gatling guns into the toolbar (works the same way as with small ships)
Some tips:
-U can still use 'P' for landing gears or connectors, the gatling guns will not detach -Since a recent update Connectors stay connected without power, i.e. the guns will never detach -In creative, paste it in while slowly moving towards the connector -You can change the Connector strength, if that makes alignment easier -If you attach it with a tugboat, you can yaw it inwards to sight them in, so they will not shoot parallel but converge
Как установить и запустить
Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.