Поиск по STEAMB

Игры и программы по онлайну, скины по объёму продаж

Ничего не найдено

Попробуйте другое название или переключите категорию.

Меню

Чертежи

ISL - Small Ship Printer Basic MK 3

Положительные голоса95%85 голосов игроков
Подписчики5,7 тыс.5 696 в Steam Workshop
Размер файла584,86 КБЗагрузка через Steam
Обновление автора12 мая 2021 г.Дата обновления материала

Изображение 1 из 2. Материалы автора из Steam Workshop.

Изображение 1 из 2
Установить через Steam

О материале

«ISL - Small Ship Printer Basic MK 3» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.

Описание автора

An example set up for a small ship factory that is able to print all the ISL ships in this collection. Only the essentials to make the printer functional and user friendly are included, the idea being that you can attach it and cover it however suits your base/ship.

This time with two projectors and Brianetta's Projector Aligner script to make it easier to use.

When building in survival, the projector head will have to be added and welded separately. To do so:

  • Add a small head to the rotor and place a projector directly onto it.

  • load the blueprint for the projector head (linked under "required items" and line it up with the first projector and the rotor head.

  • weld.

Taking a blueprint of the multi-grid factory structure, and trying to project it onto a LG projector results in only the small grid part showing up. I am guessing this has to do with the number of blocks being more on the SG part than any of the LG parts. This is why the Projector head is a separate blueprint, which can be found under "required items".

Setting up a Projection:

Once all the parts are placed and constructed , enter the control seat (you may have to re-add some buttons to the toolbar) and press button 1 on the toolbar to take control of the RC block.

Use the mouse and keyboard movement controls to line up the merge blocks of the printer and projection. Use the RC block toolbar to control the script:

Toolbar 1

  1. Printer PB projector aligner - "up"
  2. Printer PB projector aligner - "down"
  3. Printer PB projector aligner - "apply"
  4. Printer PB projector aligner - "build"

Controlling the Welder Piston:

Use the buttons in the control seat toolbar:

Toolbar 1

  1. RC Printer Projection - control (for aligning the projections using Biranetta's script
  2. Welders On/Off
  3. Merge Block On/Off
  4. Welder Piston - Reverse
  5. Welder Piston - On/Off
  6. Projector 01 - On/Off
  7. Projector 02 - On/Off
  8. Projection Arm Piston - Reverse
  9. Projection Arm Piston - On/Off

To print a ship:

  • Once you have you projection lined up and are ready to print, extend the welder-piston.

  • When the piston is fully extended, turn on the welders and wait until they have finished building the first layer. The time this takes will depend on your world's welding speed multiplier.

  • Now that the first layer is complete, turn the welder piston off, then reverse its direction so that is it retracting. It should not yet move.

  • Turn the piston on then off again to retract slightly and wait for the next layer to be printed, then repeat until the ship is finished.

  • Once all blocks have been welded up, turn the welders off and climb into the ship (also add ice if it is a hydrogen ship). It should now be safe to turn off the merge block and fly/drive your ship/vehicle.

  • If the printer is high off the ground, and you have printed a rover, you can extend the piston that the projector/rotor is on to lower your new vehicle safely before detaching

A weird bug that I have experienced inconsistently, especially on dedicated servers, is that sometimes the ship merge block won't attach properly to the printer. if this is happening to you, just place 2 light armor blocks next to each other, one on the side of each merge block, then grind them off when the ship is finished (the merge block should stay locked when the ship is complete).

Оригинал в Steam Workshop

Как установить и запустить

Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.

Настройки cookies

Вы можете изменить выбор в любой момент. Отказ от аналитики не ограничивает доступ к сайту.

Технологии, провайдеры и сроки хранения