<The Wandering Earth>the Navigator Platform International Space Station
Изображение 1 из 22. Материалы автора из Steam Workshop.
О материале
«<The Wandering Earth>the Navigator Platform International Space Station» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.
Описание автора
This time I tried to restore the Navigator Platform International Space Station in the movie " The Wandering Earth". I still overestimate the game optimization of Keen.
I used a total of 8 MODs. The ratio of the pilot space station and the movie was about 0.875:1, which is close to 1:1, the full length is more than 1000 meters, the diameter of the front disk is close to 700 meters, the total number of blocks 233,335.In fact, the number of blocks is not very much. But the most terrible thing is that in order to restore the shape, the rotor and the hings are no less than 4 digits, so the number of sub-grids is conceivable, which leads to an astonishingly low fps. In the construction process, I tried to use the segmented construction mode, first build each segment in different archives, and then assemble them in one archive. The final number of frames is only about 8-9 fps.
Warning! Warning! Warning! The loading speed of the archive is very slow! At least 10 minutes!
Another point is that due to the SE bug, the hibernation cabin ring cannot rotate. I tried various ways (KEEN doesn’t expect anyone to turn hundreds of thousands of tens of thousands of sub-grids). Only the main control room at the front and the four-quarter rotating warehouse in the middle and the six-quarter rotating warehouse at the rear can be rotated. Because the archive is too stuck, and the cabin itself is relatively heavy, the rotation speed is very slow.
Although the dormant cabin cannot be rotated, it can still be separated as in the movie. The control group HBK and LJQ can separate the dormant cabin, and the group QJ3 can move the space station forward, as shown in the picture.
Finally, there is a certain difference between the structure I made and the film. On the one hand, it is because some of the structure in the film is very strange. In addition, there are other parts of the structure that are also different, one part is the limitation of SE, and the other part is to reduce the trade-offs made.
I saw the video made by LSG for this work. I forgot to say that the room with the cabin is in the ring-shaped inner circle. Due to the limitation of the spatial structure, there is no cabin in the outer circle.
Как установить и запустить
Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.