Поиск по STEAMB

Игры и программы по онлайну, скины по объёму продаж

Ничего не найдено

Попробуйте другое название или переключите категорию.

Меню

Чертежи

V.M.E Mobile Autocannon Trailer

Положительные голоса98%189 голосов игроков
Подписчики12 тыс.11 950 в Steam Workshop
Размер файла1,29 МБЗагрузка через Steam
Обновление автора28 авг. 2020 г.Дата обновления материала

Изображение 1 из 8. Материалы автора из Steam Workshop.

Изображение 1 из 8
Установить через Steam

О материале

«V.M.E Mobile Autocannon Trailer» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.

Описание автора

The G.MS-T341 by Valkyrja - Maintenance & Engineering is a two-axle military trailer on 3x3 wheels, carrying a single gatling turret.

While this trailer was designed for the G.CS-LDT-1 Light-Duty Truck, it can be attached to any fitting vehicle with a compatible 1x1 Hinge tow-hitch.

This item is survival-ready! It is fully conveyor-linked, thruster-damage compatible and uses no mods or subgrids.

Keep in mind that wheels and the head of the piston-stand technicaly count as subgrids. So you will see a warning when loading it into a projector. The wheels should attach automaticly when building this item. The stand will work fine without the head, but to level the trailer correctly, I suggest adding it through the control menu manually.

Datasheet

Blocks: 94 Non-armor blocks: 55 PCU: 1,582 Triangles: 105,895 Grid mass: 11,962 kg

Key features

Automatic Setup Move your Towing vehicle to the Hinge and lock the Vehicle to the Trailer. Press the button and the Trailer will...

  • Raise the Piston stand
  • Unlock the horizontal steering hinge
  • Deactivate the beacon
  • Release the wheel brakes

If you've built this in survival, check these functions before heading of!

Press the button again before detaching the Trailer from your vehicle. The Trailer will Reengage the brakes and piston stand to have your Trailer ready for deployment.

The G.XS-T321 comes with the following mission equipment:

  • 1x Gatling turret

  • 1x large battery

  • 3x small batteries

  • 2x ammo containers

  • 1x Programmable Block (blank)

  • 1x spare wheel

When exposed to the sun regulary, the batteries get enough power to keep this thing active for half of eternity. Ammo capacities are big enough to keep your perimeter secured. Deploy multiple trailers for an effective AA-screen.

Instructions


[b]Setup:[/b]
Make sure your towing vehicle is equipped with a compatible tow hitch. It will need a small grid 1x1 hinge that allows for vertical travel - meaning it must be able to move up and down.
Remove the hinge-part. This is where the trailer will be attached to.

The hinge should be mounted at the same high of your (3x3) wheel suspensions, so ~2 small blocks above ground-level. You can set it a bit higher or lower, but keep in mind that this might interfere with the trailers own ground-clearence. But you can adjust the suspension settings to a certain level.

If you have build the trailer in survival, you will need to add the counterpart hinge to it as well. See the screenshots for reference and make sure it is aligned correctly. 

 
[b]Hook-up:[/b]
Carefully drive your towing vehicle to the trailers hitch in reverse. If you do it correctly, both the hinge on your vehicle and the hinge-part on the trailer should intersect without pushing the trailer away. 

Access the vehicles tow-hinge either via control-menu or toolbar-shortcut and select "Attach". The hinge should now connect to the trailer. If this does not happen, check the "troubleshooting"-section.

If your trailer is attached, get out of the vehicle and press the button on the right side of the trailer. You will now see the piston stand rising up.

That's it. You're now ready to head out!


[b]Troubleshooting[/b]
[b][i]The Trailer won't attach to my vehicle[/i][/b]
Step out of the vehicle and take a good look at your setup. First, make sure both your car's hinge and the trailers hinge-part meet and are both aligned correctly and at a clear angle. If both ends are offset in high, tweek with your car's suspension-settings until they are leveled. If that's not enough, you can also change the trailer's piston-stands elevation settings to extend or lower the hinge-part.

Check if both car and trailer don't have their original hinge-counterpart on them. Use the "Deatch"-button in the control menu or grind them off if neccessary.

Check if the hinge part was pushed to the side by the horizontal hinge. If that happend, acces the control-menu of the trailer, find the hinge and activate the hinge-lock. Realign your vehicle. You should now be able to move up, with the hinge-part staying in place.

Credits

Visual Mods & Skyboxes for Screenshots

Varia

Оригинал в Steam Workshop

Как установить и запустить

Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.

Настройки cookies

Вы можете изменить выбор в любой момент. Отказ от аналитики не ограничивает доступ к сайту.

Технологии, провайдеры и сроки хранения