Поиск по STEAMB

Игры и программы по онлайну, скины по объёму продаж

Ничего не найдено

Попробуйте другое название или переключите категорию.

Меню

Миры

`Salamis` class Station

Положительные голоса92%64 голосов игроков
Подписчики3 тыс.2 971 в Steam Workshop
Размер файла644,59 КБЗагрузка через Steam
Обновление автора15 февр. 2014 г.Дата обновления материала

Изображение 1 из 14. Материалы автора из Steam Workshop.

Изображение 1 из 14
Установить через Steam

О материале

«`Salamis` class Station» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.

Описание автора

Mass: 82128496kg Acc: 0 - 2m/s in 30s Armour: Heavy Primary armament: 'Omega' class gravity cannon Secondary armament: Ship to Ship turrets

The 'Salamis' class mobile station is designed to act as a frontier outpost, to resupply and rearm warships, and provide a secure facility for processing and storing raw materials. It is armed with an 'Omega' gravity cannon, able to ward off even large capital ships. There are four docking pads on the outer ring of the station, and access to the main station is gained by passing along a footbridge, which leads into the crew quarters and medical bay. The outer ring contains the cargo storage area, assemblers and refineries, as well as a great deal of empty workspaces that can be put to use for whatever task is necessary. The bridge is at the top of the central column and contains five control consoles. The main command console faces vertically, towards the nose of the craft, and has green and red nav lights either side of it.

I created the armour for this station by importing a 3d model with SE Toolbox. I hope that it shows you the potential this piece of kit has, and you download it! you can find it on the KSH forum.

The model itself was downloaded from turbosquid.com, which provides free 3d models, as well as some which are worth hundreds of dollars. all are royalty free. of all of the sites that i have seen, this has the best selection... please bear in mind that the models are not symettrical when they are imported so you need to cut it in half and use mirror mode in SET to create a perfectly symetrical model to use as the basis for your ship (unless you are happy with it as it is of course!)

The orginal model for this station was created by KuhnIndustries, and can be found here http://www.turbosquid.com/FullPreview/Index.cfm/ID/702873. full credit goes to him for an awesome model, and my gratitude for uploading it :)

Update v0.2 Started work on interior, done some tidying up on exterior, barrel is ready, started work on firing chamber, docking ports with conveyer placed, exterior nav lights placed... next update will be completed firing chamber

Update v0.3 Firing chamber and barrel armed, projectile is subjected to 32N when mag clamp is released, and 400N when leaving barrel. lined up on target made up of 3 layers hvy armour. Also added cargo containers, and connected them to reactors and to small cargo container in firing camber, where rocks for shells can be found... currently storing over 14k of stone, so plenty to play with. also added 2 mechs, one with a completed shell attached. shell is 5x5x12 small ship with double layer of hvy armour

Update v0.4 Added a shielded command area in firing chamber to protect operator from shrapnel in case of misfire. Added medical bay, and extensive crew quarters, and laid deck for 2 more levels with connecting ladders

Update v0.5 Large amount of interior blocks added, now main body of station contains 10 main levels

Update v0.6 Armour has been smoothed to closer resemble finished structure :)

Update v0.7 Added assemblers and refineries, and connected them to cargo. begun work on interior of outer ring. I am hoping that more blocks will be released soon, otherwise there will be a lot of empty rooms!

Update v0.8 Interior of central station is complete, just needs furnishing.. am planning on having crew quarters/ med bay on entry level, rec room/canteen on level above with engineering on level below, then 3 floors above canteen which can be used for briefing rooms etc, internal security point above those, and the bridge at the top. currently there is a ladder into the bridge from outside, which will be removed. outer ring interior still to do, then adding extra thrusts and interior lights, so hopefully next with next update station will be finished

Update v1 Complete!

Оригинал в Steam Workshop

Как установить и запустить

Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.

Настройки cookies

Вы можете изменить выбор в любой момент. Отказ от аналитики не ограничивает доступ к сайту.

Технологии, провайдеры и сроки хранения