OPC Rokiclaw - Medium Mining Ship
Изображение 1 из 12. Материалы автора из Steam Workshop.
О материале
«OPC Rokiclaw - Medium Mining Ship» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.
Описание автора
NO MODS | OPTIONAL SCRIPTS | SURVIVAL READY CONTAINS: DLC | PARTIAL SUBGRIDS
Due to growing needs and production capacity, Consolidation is gradually upgrading its ships. Following Turbot, which replaced utilitarian drones, it was time to upgrade the fleet of mining ships. The old Ferret, which had served the outer colonies well before the formation of the OPC, had exhausted their technical capabilities. And while the Consolidation was preparing these ships for sale to buyers interested in a cheap mining fleet, they were replaced by Rokiclaw - a new generation of space mining ships.
Rokiclaw - a ship developed by OPC as part of the expansion of asteroid belt mining within Consolidation systems. being the middle model in the line of the new fleet, Rokiclaw is primarily designed for excavation operations, for which the front mining installation is used, but despite the fact that due to its size, this ship is not able to independently dive deep into asteroids in a direct course (instead, it must gradually move as "ticker"), the mining drone included in its composition can do this instead, and a special place for the drone pilot will allow you to take on board an additional crew member, thanks to this, there is no need to distract the pilot of the ship from his tasks.
Survival ready Airtight interior Transparent LCDs for displaying additional information about the ship 2 Double H-69S Power engine 12 Large cargo containers 12 Small hydrogen tanks 5 Mining Drills 1 DSM-2 Rynir Mining Drone
5125 small blocks (with drone) 18.546 PCU (with drone) 4920 small blocks (without drone) 16.720 PCU (without drone) 221.959 Kg mass
An few important point about Survival Ready: I love survival and therefore the ship is primarily designed for use in survival mode, but there are several subgrids on board. They construction in survival is not mandatory (we are talking about landing gear, but since the ship is designed for space travel, it can safely use the connector for the dock and the overall design of the ship provides no chassis), but for those wishing to use the landing below there are simple instructions on how to collect and prepare their own chassis
-
DSM-2 Rynir Mining Drone link for the survival players
-
Cargo Truck from 1st screenshoot
HOW TO CREATE LANDING GEARS:
FRONT:
[olist]
[*] Place rotor to front hinge
[*] Set it name as "Rotor"
[*] Set it lower limit to 0 and upper limit to 90 (be careful about the location of the block, you may have other values. It is important that the difference between the lower and upper limit is no more than 90 degrees)
[*] Set it torque to 10kNm and braking to 29 kNm, velocity to 5rpm and displacement to 4.5cm
[*] Place Landing Gear to rotor top
[*] Add Rotor and Hinge to "Landing Gear Front" group (or update if group exists)
[*] Add Landing Gear to "Landing Gears" group
[/olist]
REAR:[olist]
[*] Place Pistons on the rear hinges
[*] Set their names as "Piston LG-L" and "Piston LG-R" (where -R and -L is Right or Left)
[*] Set their velocity at 0.5m/s and maximum distance 2m
[*] Place on their top hinges
[*] Set lower limit of hinges to -30 or 0 (depends on which side you install the block on) and upper limit to 0 or 30
[*] Set Torque to 3.1 MNm , Braking to 6MNm and Velocity to 4rpm
[*] Set their names as "Hinge LG-R2" and "Hinge LG-L2" (where R2 and L2 is Right or Left)
[*] Place Landing Gears to top of hinges
[*] Update or create groups "Landing Gear Rear Hinges" and "Landing Gear Rear Pistons"
[*] Add all hinges to "Landing Gear Rear Hinges" and all pistons to "Landing Gear Rear Pistons"
[/olist]
Update 16/02/22: Added OPC mOS Fixed interior air leak
Want to be on the edge of news and see what other will not? Join the OPC discord! https://discord.gg/zZHAccYpzV If you have any ideas, suggestions or just want to express your opinion, then be sure to write in the comments section!
Как установить и запустить
Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.