ISL - Nurina RO-34 Forklift
Изображение 1 из 19. Материалы автора из Steam Workshop.
О материале
«ISL - Nurina RO-34 Forklift» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.
Описание автора
Purpose
A small vehicle equipped with a piston and landing gear lift, overridden gyroscopes for counterweight, and a stabilising landing gear on a hinge.
For a larger vehicle the fulfills the same role, try the Lontra RO-72 Utility Truck.
Features
Rotation Turning Mode - Toolbar 4 For turning in tight spaces, there is an alternate steering mode (use Toolbar 4, Buttons 8 and 9). This alternate mode alters the propulsion and steering on some wheels. Once activated (Button 8), tap forward or back to turn almost on the spot, then deactivate (Button 9) to return to normal steering.
Tow Hitch & Piston winch - Toolbars 3 & 5 The Forward facing piston is a winch, designed to attach to the rear of any of the ISL trucks or trailers.
This vehicle is compatible with the following Trailers:
- V.M.E Mobile Autocannon Trailer
- V.M.E Single-Axle Survival Trailer
- ISL - Gatling Turret Trailer
- ISL - Missile Turret Trailer
- ISL - Solar Recharge Trailer
- ISL - Light Cargo Trailer
- ISL - Hydrogen Storage Trailer
- ISL - Survival Kit Trailer
- ISL - Ore Detector Trailer
- ISL - Medium Cargo Trailer
- ISL - Medium Survival Trailer
- ISL - Medium Solar Recharge Trailer
- ISL - Medium Hydrogen Storage Trailer
- [AGI] ST-65 Survival Trailer
However the vehicle will struggle with the Medium Cargo Trailer or Medium survival trailer if their containers are loaded.
Landing Gear Stabilizer & Gyro Counterweight - Toolbars 4 & 6 If movement isn't required, only lifting, the Nurnia is able to anchor itself using a landing gear on a hinge (mounted on the right side). Or for moving with heavy loads, there are 6 overridden gyroscopes.
Piston Lift - Toolbar 7 A small grid with 2 Landing Gears mounted on a piston.
Printable This vehicle is still considered "printable," however, there are 3 sub-grids; one Landing gear, one hinge head, and the crane head, which will be printed along with the vehicle.
After printing, using a set up such as (https://steamcommunity.com/sharedfiles/filedetails/?id=1967085548), place and weld up the landing gear as shown in the screenshots, then add it to the "Nrn1-R Landing Gear Stabiliser" group for the toolbar button to function.
Also place and weld up the hinge head onto the head of the forward facing piston, in the orientation shown in the screenshot.
To attach the crane head to the piston, follow along with the screenshots:
- remove the head from the rotor.
- place it on to the piston head and weld it up.
- grind down the light armour blocks painted red to detach the crane head (starting from the top)
- Press the button on the rotor to attach it to the piston. Set up Complete.
Timer Blocks TB Safe Crane Detach - Turns off counterweight gyroscope override and unlocks lift landing gear. This is to prevent unlocking landing gear while gyro override is still on, which may result in the forklift pitching backwards rapidly.
TB Rotate Mode - Activates alternate steering mode for turning in tight spaces
TB Steering Mode - Deactivates alternate steering mode
Tools, Scripts & Weapons: Trailer Manager Script
Power: 9 Small Batteries 3 Small Hydrogen Tanks 1 Hydrogen Engine
Movement & Control: 1 Rover Cockpit 1 Remote Control 7 Gyroscopes 4 Wheels (3x3)
Cargo Space 1 Small Cargo Container 1 Connector - underside
Miscellaneous: Repair Projector 3 Cameras - Front, Underside, Rear
This ship has an empty mass of 14684 kgs.
The Programmable block is turned off in this blueprint and all toolbars are the same from the cockpit and remote control.
All ships, vehicles & trailers in this set have a rear mounted Merge block and can be printed using a welder wall with one (large grid) piston. However in this case the merge block is designed to be ground down after printing, all blocks that require removal are painted bright red.
Toolbars Wheels & Connectors
Toolbar 1
- Wheel Power Down
- Wheel Power Up
- Wheel Friction Down
- Wheel Friction Up
- Lights On/Off
- Connectors Switch Lock
- Wheel Strength Down
- Wheel Strength Up
- Handbrake On/Off
Toolbar 2 - Batteries, Cameras & Antenna
- Batteries Discharge
- Batteries Recharge
- Camera Front
- Camera Underside
- Camera Rear
- Antenna Broadcast On/off
Toolbar 3 - Tow Hitch & Hydrogen Systems
- Gyro Override On/Off - Anti Flip System
- Hinge Tow Hitch - Attach
- Hinge Tow Hitch - Detach
- Piston Winch Extend/Retract
- Hinge Tow Hitch - Lock On/Off
- Hydrogen Engines On/Off
- Hydrogen Tanks Stockpile On/Off
Toolbar 4- Stabilisers & Steering
- Stabiliser hinges reverse
- Stabiliser Landing gears - Lock
- Stabiliser Landing gears - Unlock
- TB Steering Mode
- TB Rotate Mode
Toolbar 5 - Trailer Manager
- PB Trailer Manager "up"
- PB Trailer Manager "down"
- PB Trailer Manager "apply"
- PB Trailer Manager "back"
- Rotating Lights On/Off
- PB Trailer Manager "connector"
- PB Trailer Manager "unpack"
- PB Trailer Manager "attach"
- PB Trailer Manager "detach"
Toolbar 6 - Gyro Counterweight & Miscellaneous 1. 2. 3. 4. 5. Repair Projector On/Off 6. Counterweight Gyros - On/Off 7. TB Safe Crane Detach - Counterweight Gyros Off & Landing Gear Unlock 8. Counterweight Gyros - Decrease Strength 9. Counterweight Gyros - Increase Strength
Toolbar 7 - Crane Controls 1. 2. 3. Crane Landing Gear - Lock 4. Crane Landing Gear - Unlock 5. Crane Piston - On/Off 6. Crane Piston - Reverse
Как установить и запустить
Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.