Laser Antenna Grid Firmware
Изображение 1 из 6. Материалы автора из Steam Workshop.
О материале
«Laser Antenna Grid Firmware» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.
Описание автора
This mod updates the laser antenna with the following new features.
-
Adds a new option to draw a laser in between the two connected antennas (the colour can be customised too)
-
Adds a new option to connect the connected antenna's grids (enabling wireless power transfer)
UPDATE: MULTIPLAYER NOW WORKS!
Connecting Grids
Once the antennas are connected and functioning properly, there is a new option in the control panel that enables you to connect their grids together. Once their grids are connected, they will act as if they are on the same grid. This allows full wireless control and power transmission across the laser. However, this doesn't support the transfer of items.
Power Consumption
When grids are connected, the power consumption of the antennas is increased by 5,000% of normal. This is to prevent beaming power to remote ships, moons or planets (unless you really get serious about power generation). In essence, grid connected antennas will collectively draw about 1 Kw per metre (1 Mw per kilometre). This only applies when grids are connected. I may adjust this after public testing.
Caution when relying on a connected grid's power
Once your grid is connected, power will flow between the connection. This means that a connected grid may in future get too over-reliant on the connected grid's power. For example, if a grid is disconnected in future, it may not have enough power on it's own to reconnect. If this is the case, the antenna may drain all grid power trying to reconnect. A simple solution is to set the antenna to idle while you add more local power or move the grid closer to reconnect.
-
Keep an eye on how much power your grid requires if it ever needs to reconnect in future
-
Mind that nothing breaks the laser beam as that will temporarily sever the connection
Issues
If you find something not working correctly please leave a comment below.
Blueprints & Creative Tools
Always make sure to disconnect the grids if you are copy/pasting or blueprinting a grid, because if they are connected you will grab everything!
Acknowledgements
A big shout out to Digi on the official Keen Software discord for occasional help.
Как установить и запустить
Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.