ISL - Medium Flatbed Trailer
Изображение 1 из 15. Материалы автора из Steam Workshop.
О материале
«ISL - Medium Flatbed Trailer» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.
Описание автора
Purpose
A trailer for transporting Vehicles and other, larger grids, with a ramp at the rear that can be raised and lowered for vehicle access and landing gear in the floor of the platform to for extra stability in transit.
Important: Sharp turns are not recommended when towing this trailer while loaded. While carrying a vehicle, this trailer becomes top-heavy.
There are hinges at the front and rear that function as tow hitches, allowing connections to either trucks or other trailers. As this is not designed as an autonomous vehicle, each trailer is controlled primarily through the use of labeled buttons, although an RC block is still present. Check the "Movement & Control" section for a list of the buttons and their functions.
The vehicles that are compatible with this trailer include:
- ISL - Iktis RO-100a Light Truck
- ISL - Iktis RO-130b Light Truck
- ISL - Ratel RO-720 Excavator
- ISL - Marten RO-520 Excavator
- ISL - Marten MK2 RO-520 Excavator
- ISL - Lakan RC-630a Medium Truck
- ISL - Lakan RC-700b Medium Truck
- ISL - Nurina RO-34 Forklift
- ISL - Mara RO-54b Survival Truck
- ISL - Mara RO-122a Light Cargo Truck
- ISL - Lontra RO-72 Utility Truck
- V.M.E Light Utility Vehicle
- V.M.E ACR-6 Armoured Risk Control Vehicle
- V.M.E Light-Duty Truck
- V.M.E Brawler Tactical Armoured Patrol Vehicle
- V.M.E ACR-8 Armoured Ground Combat Vehicle
- V.M.E ACR-4 Armoured Combat Rover
- [AGI] SV-64 Castor (Scouting Vehicle)
- [AGI] LTV-73 Plutus (Light Tunneling Vehicle)
This trailer is still considered "printable" although additional assembly is required after printing. Listed below and shown in the screenshots:
- Add a single hinge head block on to the front hinge.
- As the ramp relies on two sub grids, a temporary scaffolding (in red) is printed with the trailer. Start by grinding the 2x1 window blocks off the scaffolding.
- The ramp parts will drop with their hinge heads aligned with their corresponding hinge bases.
- If the ramp parts are sitting vertically, nudge them so they are leaning against the other side of the scaffold, sitting at an angle. This should minize the risk of Klang.
- Once the ramp parts are aligned, use the red button under the merge block to attach them.
- Grind off all temporary blocks, painted red.
If you are pasting this trailer instead of printing, you can find an already assembled version here.
Features
Power: 9 Small Batteries
Movement & Control: 1 Remote Control 6 wheels - 3x3
The buttons and timer blocks found on this trailer, and their functions, are as follows:
- Pack Button - Trigger TB Pack
- Unpack Button - Trigger TB Unpack
- Attach Button - Attach hinge head to rear mounted hinge base (tow hitch)
- Detach Button - Detach hinge head to rear mounted hinge base (tow hitch)
- TB Pack - Front Hinge Unlock, Piston Retract, Handbrake Off, Lights On, Turret Off, PB, Off, Antenna Off
- TB Unpack - Front Hinge Lock, Piston Extend, Handbrake On, Lights Off, Turret On, PB On, Antenna On
- Attach Ramp Hinges Button - temporary button used for assembly after printing
- Lock/Unlock Landing Gear Buttons - For locking in place vehicle (or other grid) on top of the trailer.
- Lower/Raise Suspension Buttons & TBs - changes wheel height on the trailer to allow better ramp access
- Ramp Hinges Up/Down Buttons - Raises/Lowers the vehicle access ramp.
Cargo Space 1 Small Cargo Container 1 Connector (underside)
Miscellaneous: Repair Projector
This trailer has an empty mass of 52011 kgs.
All ships, vehicles & trailers in this set have a rear mounted Merge block and can be printed using a welder wall with one (large grid) piston. However in this case the merge block is designed to be ground down after printing, all blocks that require removal are painted bright red.
Как установить и запустить
Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.