Homeworld Baserunner Suspension MK-1 and MK-2 (Vanilla and Offroad)
Фото и видео: 1 из 16. Материалы автора из Steam Workshop.
О материале
«Homeworld Baserunner Suspension MK-1 and MK-2 (Vanilla and Offroad)» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.
Описание автора
On the bleeding edge of suspension tech, i bring you my latest prototype design.
INSTRUCTIONS:
- Select a base and add cockpit of your choice from the selection provided (or set up your own by adding the same grouping), remove any base you are not using
- Remove the red blocks
- Add the programmable block requested from your coice.
- Recompile the scripts after your base is ready
For the non script users:
- Add "enough" gyroscopes and thrusters to allow manual control
- Turn down friction on the Wheels group until gyroscope control works- Alternatively: Use MK-2 Base type, Add wheels group with following:
- Increase/Reset/Decrease steering override
- Increase/decrease propulsion override
Info: This one uses a rotor arm as a spring to give the utmost travel. Aswell as a 5x5 large grid wheel mounted to a short 3x3 suspension.
When you add weight to the vehicle, remember to tune the suspension by adding torque to the master rotors and strength to the Short wheel suspension 1x1
The MK-1 uses Scripts to align the wheels to ground. The MK-2 uses mechanical subgrids to align the wheels to ground
Please credit me if used in your own creation, also please show me what you make with it if you use it!
Thanks to Whiplash141 and Tekk for their amazing subgrid wheel script's that makes things like this possible!
- https://steamcommunity.com/sharedfiles/filedetails/?id=1445055239
- https://steamcommunity.com/sharedfiles/filedetails/?id=1976365207
Further thanks to Whiplash 141 for the "Rotor angle duplicator" script, which made this design so much more polished
DLC blocks in use:
- Cylindrical Column - MK-2 mechanical suspension strut
- Neon Tubes - MK-2 Mechanical suspension strut to avoid the bottom and top Strut ever merging together (Clang reduction)
- Offroad Wheels - Both MK-1 and 2
Как установить и запустить
Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.