Поиск по STEAMB

Игры и программы по онлайну, скины по объёму продаж

Ничего не найдено

Попробуйте другое название или переключите категорию.

Меню

Скрипты

Turret displacement system

Положительные голоса94%125 голосов игроков
Подписчики1,8 тыс.1 794 в Steam Workshop
Размер файла884,64 КБЗагрузка через Steam
Обновление автора5 февр. 2024 г.Дата обновления материала

Изображение 1 из 2. Материалы автора из Steam Workshop.

Изображение 1 из 2
Установить через Steam

О материале

«Turret displacement system» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Для установки откройте оригинал в Steam Workshop, проверьте требования автора и подпишитесь. Совместимость с версией игры редакцией не проверена.

Описание автора

Got a weird spot on your tank where you can't quite depress/elevate and you don't want to set up piston control groups? This script is for you!

Demonstration Vehicle

OPERATING INSTRUCTIONS

This script is intended to work with custom turret controllers, or turret scripts like MART.

Create a group of blocks named "Turret Displacer" containing at least one rotor/hinge named "Azimuth" and another named "Elevation" (or whatever you have set the name to in the script), and as many pistons as you need.

Define your keyframes below. For hinges, and rotors with predefined limits, you will need to use keyframes between -180 and 180. For rotors without limits, you must use numbers between 0 and 360.

If you aren't sure, use the same numbers as seen in the terminal.

You can also set the combination type. The different types are:

Add: Adds the values of the keyframes together. SubtractAzimuth: Subtracts the azimuth value from the elevation value. SubtractElevation: Subtracts the elevation value from the azimuth value. Max: Uses the highest value of the keyframes. Min: Uses the lowest value of the keyframes. Average: Averages the values of the keyframes together. Multiply: Multiplies the values of the keyframes together.

Everything else in the script should be self explanatory.

Оригинал в Steam Workshop

Как установить и запустить

Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.

Настройки cookies

Вы можете изменить выбор в любой момент. Отказ от аналитики не ограничивает доступ к сайту.

Технологии, провайдеры и сроки хранения