Large ring rotors with central tunnel
Изображение 1 из 4. Материалы автора из Steam Workshop.
О материале
«Large ring rotors with central tunnel» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.
Описание автора
IMPORTANT NOTE: Before subscribing to this mod be sure to check out DX11-ready Two-ended Motors, ShaoCorp Rotors and Rotor Variety first, as those offer similar functionality while being smaller and not having as many issues.
DESCRIPTION: These very large rotors with a walkable 1x1 and 3x3 tunnel in the middle are primarily intended for ships and stations with rotating modules. Both 3x3 tunnel and compact versions also have 4 conveyor doors (2 on opposite ends of the stator + 2 on the sides of the ring) to facilitate cargo transfer among both fixed ends of the rotor and the ring itself.
Known issues:
-
Clicking "Detach" button in the Control Panel will break the rotor permanently with no way to re-attach the ring in-game,
-
It is possible to clip into rotor from outside in a couple of places, due to physics engine limitations,
-
The tunnel isn't airtight, again due to engine limitations. To pressurise the tunnel, surround the rotor with force fields,
-
Sometimes a ring will spawn off-centre. Placing any block on a ring appears to fix this,
-
Blocks cannot be built directly inside a tunnel (and due to the same reason, any attempt to use merge blocks in the tunnel will fail). The workaround is to build those blocks as a separate ship and then anchor them to the main vessel via landing gear,
-
The 3x3 tunnel rotors placed prior to 8 nov 2014 might break and need to be replaced,
-
The compact rotor doesn't have construction stages yet.
Edit 26 oct 2014: Added even bigger rotor with 3x3 tunnel.
Edit 4 nov 2014: (Very crude) Construction stages added.
Edit 8 nov 2014: After examining some pre-made models decided to retract my previous statement about cargo transfer being impossible and converted 3x3 tunnel version into an advanced ring rotor. The 1x1 tunnel version will remain a regular one for balance and realism reasons. Also increased maximum torque of both rotors to 300 MN*m (use at your own risk) and cleaned some misaligned textures.
Edit 2 mar 2015: Shamelessly stole SquallTemnov's concept. Also added separate G-menu category.
Edit 30 may 2015: Fixed "black box" issue in DX11 mode.
Special thanks to:
-
Harag for his modding tools,
-
Keen Software House, for providing a convenient square of just the right size in the middle of the rotor model.
Как установить и запустить
Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.