Поиск по STEAMB

Игры и программы по онлайну, скины по объёму продаж

Ничего не найдено

Попробуйте другое название или переключите категорию.

Меню

Скрипты

Landing Gear Balancer

Положительные голоса99%147 голосов игроков
Подписчики3,5 тыс.3 508 в Steam Workshop
Размер файла20,06 КБЗагрузка через Steam
Обновление автора7 дек. 2025 г.Дата обновления материала

Изображение 1 из 9. Материалы автора из Steam Workshop.

Изображение 1 из 9
Установить через Steam

О материале

«Landing Gear Balancer» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.

Описание автора

Adjustable landing gear pistons to compensate for uneven terrain and land with your ship horizontal.

Version 1.3 - 2025-12-07 Added "unlock_retract", "unlock_extend", "unlock" commands Also works when landing on grids (ex : large grid landing pad that is not level for some reason), in addition to planets and asteroids groud.

Designed for use with:

  • Up to 100 landing gear kits (1 kit = piston+landingpad+camera)

Functions

  • use one downward-facing camera on each landing kit to measure distance from ground
  • adjust the lenght of all landing gear pistons to compensate
  • provide warning if the terrain is too uneven
  • in long legs mode, all pistons are extended by default, and they retract if needed due to uneven terrain
  • in short legs mode, all pistons are retracted by default, and they extend if needed due to uneven terrain
  • the script activates autolock on each leg, and turns itself off when one has locked

Installation

  • Set up to 100 landing kits, with a magnetic plate on a piston, and a downward facing camera as close as possible (but with a direct, unobstructed view of the ground)
  • Create groups for each landing kit, named LGB_kit1, LGB_kit2 etc. with the 3 items in each
  • The names must be continuous, starting at 1 and going up to 100 (LGB_kit1, LGB_kit2, ..., LGB_kit100). If there is one missing (ex: LGB_kit1, LGB_kit2, LGB_kit4), the script will stop at LGB_kit2
  • (optional) Install an LCD screen with the proper name (see below) to see what the script does
  • install the script in a programmable block
  • recompile the script if needed to let it autoconfigure itself

Usage

  • When close the the ground, activate the script in long legs or short legs mode
  • Keep the ship horizontal yourself, or use another script (ex: Flight Assist or my own Soft Landing Mananger) to do it
  • The script start to check the ground below an altitude of 100m (configurable)
  • If the ground is too uneven, the script does it best and the LCD turns red.

Command line arguments

  • off: turns the script off (ex : when already landed, etc.) without moving the pistons
  • on: activate the leg balancer, preferring long legs
  • on_longlegs: activate the leg balancer, preferring long legs
  • on_shortlegs: activate the leg balancer, short long legs
  • retract: retract all legs, then turn the script off
  • extend: extend all legs, then turn the script off
  • unlock_retract: unlock and retract all legs, then turn the script off
  • unlock_extend: unlock and extend all legs, then turn the script off
  • unlock: unlock all legs

More info

On Github : https://github.com/silverbluemx/SE_LandingGearBalancer

FAQ/Issues

A few troubleshooting suggestions :

  • Look at what the programming block says when you compile the script. It should say "Group +name+ found !" and "Group +name+ has the correct setup (1 camera, 1 piston, 1 gear)" for each of the landing kits
  • Look at what the display screen say ? If "ground uneveness" is always 0 when above rugged terrain, it's the sign that the cameras can't measure distance properly.
  • Switch between on_longlegs and on_shortlegs. Do the pistons move ?
  • If the displays says "Obstructed camera on kit#" it means the camera points at the ship instead of the ground. Activate the view from the camera to see what blocks are blocking the view (only the exact center of the view needs to be clear)
Оригинал в Steam Workshop

Как установить и запустить

Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.

Настройки cookies

Вы можете изменить выбор в любой момент. Отказ от аналитики не ограничивает доступ к сайту.

Технологии, провайдеры и сроки хранения