Поиск по STEAMB

Игры и программы по онлайну, скины по объёму продаж

Ничего не найдено

Попробуйте другое название или переключите категорию.

Меню

Миры

MCLR Kailas

Положительные голоса97%239 голосов игроков
Подписчики2,6 тыс.2 612 в Steam Workshop
Размер файла98,33 МБЗагрузка через Steam
Обновление автора18 февр. 2025 г.Дата обновления материала

Изображение 1 из 29. Материалы автора из Steam Workshop.

Изображение 1 из 29
Установить через Steam

О материале

«MCLR Kailas» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.

Описание автора

Requires some MODs, DLCs and Supergrid-ON No scripts

PCU 64 399 Blocks 17 162

Note 11.06.25 : The optional Sprays adoon Pinniped's Hull Numbering looks like no longer available. This save may not load until you remove it from mod list.


Something like a description:

For the sake of high detail and all sorts of tricky things, I used many subgrids. With them, the rover looks "acceptable". The other side of the coin is that there is constant noise from the wheels. And some subgrids is clungs a little sometimes. And sometimes it stands still, as if it were a monolithic structure.

In short, if it starts shaking:

  • it might help to place/remove a block on the shaking part or on the subgrid to which it is attached or on the main grid
  • the ultimate solution is simply press save and exit to the main menu and load this save again

Yes, this rover has some of the above problems... BUT! It was not intended as a car for fun rides on the server. This is to some extent an exhibition piece. Despite the fact that it is equipped with everything necessary for playing in survival mode Therefore, the only purpose of this work in the workshop is to look at what you can build in CE, spy on a few ideas, maybe inspire someone to do something, and get a well-deserved dislikes for impractical craft =)


Information about the mods used:

1) At first I wanted to completely avoid using any block mods, but in the end I had to use the Extra windows mod and the Small cockpit chair mod. Alas, there is no way without them. Extra windows Small Open Cockpit

2) I also used a few visual mods. They are not necessary, but without them the rover will look a little different. So I highly recommend not to skip them: Edge be gone! Rendering improved SpraysMod and SpraysAddons Neon tubes + LCD Forest landscapes LCD Underwater landscapes LCD Sci-fi interfaces

3) Besides that, I couldn't resist the temptation to use these 2 very useful mods: TouchScreenAPI Button Pad (sometimes this mod loses configured buttons from LCD, apparently because the assigned action refers to subgrid)

4) The save also contains several useful mods that really helped me during construction, and several modded planets.


P.S.

  • In order not to get lost in the terminal panel, I used hashtags for groups of blocks. Some groups are divided by sections, some by functionality. If someone wants to surf the terminal and see how things work, I recommend using these hashtags. Most of them are described on the LSD panel with the "Info" mark in the title.

  • For braking or parking, it is better to use the Spacebar, or the aRBS* timer (on several panels it is assigned to the 1 key). You can use the P key, but this can break the aRBS* if you turned it on after an odd press of the P key. *aRBS: when activated, hydrogen thrusters are turned on for better braking. After the rover comes to a complete stop, this thrusters are turned off automatically with a short delay. Therefore, you dont need to activate aRBS again to turn off the thrusters.

  • To open the connector hatch and lower the camera - you just need to turn on the connector

  • You won't be able to close the outer cargo door if the ramp is down (foolproof), so don't forget to press the big red button!

  • Some subgrids, such as shutters, use a "phantom" connection. In other words, they are attached through the air. If you try to make a change to their design, this subgrid will fall apart :D

  • Smoke effects from exhaust pipes sometimes disappear. To get them back, you just need to change the type of effect

Оригинал в Steam Workshop

Как установить и запустить

Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.

Настройки cookies

Вы можете изменить выбор в любой момент. Отказ от аналитики не ограничивает доступ к сайту.

Технологии, провайдеры и сроки хранения