Поиск по STEAMB

Игры и программы по онлайну, скины по объёму продаж

Ничего не найдено

Попробуйте другое название или переключите категорию.

Меню

Миры

PFS - DDH - Jaculus Artillery Destroyer

Положительные голоса98%52 голосов игроков
Подписчики4 тыс.4 042 в Steam Workshop
Размер файла567,84 КБЗагрузка через Steam
Обновление автора29 нояб. 2014 г.Дата обновления материала

Фото и видео: 1 из 10. Материалы автора из Steam Workshop.

Фото и видео: 1 из 10
Установить через Steam

О материале

«PFS - DDH - Jaculus Artillery Destroyer» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.

Описание автора

Update 11/28/14 - Reworked the turret controls to use remotes instead of rotor velocity, allowing greater precision for turret aiming (be sure to read the turret control guide below)

Mass: 2,338,734 kg Acceleration: 6.21 m/s^2 Weapons: 4 gatling turrets, 2 Railgun turrets (2 Railguns per turret) Storage: 1 large container, 3 Small containers per Railgun turret Connectors: 2 Refineries: 2 Assemblers: 6 Drills: 2

The Jaculus is designed to be a sleeper ship. It is capable of being fully self-sustaining though its ability to mine, refine, and assemble its own ammo. It is also capable of operating off minimal power using batteries, thereby lowering its emissions and remaining invisible to enemy sensors. If need be, it also features several solar panels to allow it to recharge its batteries without the use of its reactor. Finally, it features a camouflage pattern to help it to blend in visually with its surroundings (blends with Caldari skybox)

All these systems allow the Jaculus to wait behind enemy territory and remain hidden until it is time to strike. When the target is in range, packs of Jaculi can ambush enemies and disable ships with their long range railguns, ensuring that they never get the chance nor the range to fire back.

The ship is lightly armored, preferring to use its speed and range to defeat an enemy.

Turret Control Guide -----------------------------------------------------------------------------------------------

IMPORTANT! failure to follow these guidelines will result in turret explosions

the turrets controls are preset to the consoles to the left (rear turret) and right (front turret) of the primary console on the bridge (bridge lower level)

to set up a console for the turret, these are the necessary controls:

1 - turn the respective turret's railguns (on/off) - labelled as "front turret railguns" or "rear turret railguns" in the interface - this is very important as, unfortunately in current SE, you cannot fire individual weapons. firing the railguns will fire both turrets, which could cause collateral damage if you do not have both turrets aimed at your intended target.

2 - fire railgun control - you need to use your dakka, after all, right?

3 - remote control for the respective turret (control) - this will be labelled as "front turret control" or "rear turret control" in the interface

4 - camera (view) for the respective turret - labelled "front turret camera" or "rear turret camera" in the interface

5 - VERY IMPORTANT - you need the rotor controls for the respective turret - labelled "front turret rotors" or "rear turret rotors" (decrease rotor torque & increase rotor torque). The Ability to control your rotor's torque quickly and easily is essential for operating the turret effectively. A decrease in torque will cause the turret to become more sensitive to your commands, and a increase in torque will do the opposite. This gives you added precision by giving you a sensitivity level that you find comfortable. However, you should not decrease the torque too much, at the risk of moving the turret too quickly and cause damage. All turret commands MUST be made carefully! DO NOT OPERATE AGGRESSIVELY OR EXPLOSIONS WILL OCCUR!

Finally, it is ABSOLUTELY IMPERATIVE that you maximize rotor torque when the turret is not in use. If you fail to do so, the turrets will move freely while the ship itself is maneuvering, which can cause collision damage, as well as thruster damage (on the rear turret).

For convenience, it has already been added to the primary flight console (and it is suggested you add it should you choose to control the ship from anywhere else) - the ability to control all turret rotor's torques so as to lock them down before manuevering, or release them quickly for your gunners

the control of all rotors is simply labelled as "Turret Rotors" in your interface, and you will need (Decrease Torque & Increase Torque) on your toolbar

Some have asked about donations. Obviously you needn't feel obliged, but anything is greatly appreciated and you have my thanks!

Видео автораОткрыть в YouTube ↗
Оригинал в Steam Workshop

Как установить и запустить

Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.

Настройки cookies

Вы можете изменить выбор в любой момент. Отказ от аналитики не ограничивает доступ к сайту.

Технологии, провайдеры и сроки хранения