Поиск по STEAMB

Игры и программы по онлайну, скины по объёму продаж

Ничего не найдено

Попробуйте другое название или переключите категорию.

Меню

Моды

Heat Management System

Положительные голоса98%140 голосов игроков
Подписчики3 тыс.2 955 в Steam Workshop
Размер файла16,84 МБЗагрузка через Steam
Обновление автора18 сент. 2026 г.Дата обновления материала

Фото и видео: 1 из 9. Материалы автора из Steam Workshop.

Фото и видео: 1 из 9
Установить через Steam

О материале

«Heat Management System» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.

Описание автора

Heat Management System 🚀🔥 Batteries too chill? Thrusters running a fever? Vents just blowing hot air? This mod brings a whole new layer of engineering challenge to your grids: HEAT!


Mod evolution histroy & plan

Фото и видео: 9 из 9

Attention! If you run into issues, follow the steps below ↙️

If your batteries/heat networks behave weird and you're getting a lot of messages with Infinity in them, just load the savegame without the mod, save it, and then load with the mod back. That will flush all the heat on the blocks and should solve the problem.


Heat Mods Family - for even more immersive realism

  • Heat Management System - the core, you're on its page currently
  • H2Real - the mod-satellite that covers the realism of hydrogen and oxygen with heat management.
  • U235 - the mod-satellite that makes reactors behave not like fossil fuel engines.

🔥 What Does This Mod Do?

  • Adds heat simulation to batteries, thrusters, and vents
  • Blocks generate, transfer, and lose heat based on activity and environment
  • Overheating batteries? Watch out—they might just go out with a bang! 💥
  • Vents and thrusters help cool things down, but managing thermal balance is up to you
  • Neighboring blocks exchange heat, so ship design really matters
  • Fully configurable per save — tune it to your liking
  • Extensible API – other mods can now interact with or override heat logic
  • Event Controller integration – trigger automation from heat-related events

Player's Guide is here: https://steamcommunity.com/workshop/filedetails/discussion/3513670949/591780152569065758/


⚙️ Features

  • Realistic(ish) heat transfer between blocks and the environment
  • Visual feedback: glowing lights and smoke effects for hot blocks
  • Per-save config file to tweak thresholds and rates
  • Exploding batteries if you push them too far
  • Pipe-based heat networks
  • Extensible API for 3rd-party mods
  • Event Controller events:
BlockTemperatureChanged

,

GridMaxTemperatureChanged
  • Turbo mode for Vents. Use your O2 to cool vents down fast and easily. Note that this method does not increase the heat exchange with the environment but rather cools the vents down directly.

Perfect for engineers, survivalists, and heat-loving masochists 😈


🚩Commands:

  • /HMS.dropTemp - drops all the temperatures to the initial values. Useful when you want to avoid reloading.
  • /HMS.refreshNetworks - causes a full rebuild of all the heat networks. Only available for local games.
  • /HMS.toggleInspector - toggles the heat inspector. When active, just look at any block and see its current temperature in real life.

🧰 How to Use

  1. Subscribe to the mod
  2. Load a world (new or existing)
  3. A config file will appear in your save's Storage folder:
TSUT_HeatManagement_Config.xml
  1. Edit it to adjust thresholds, rates, etc.
  2. Save the file and reload the world to apply changes

📦Which blocks affected Heat sources:

  • Batteries Heat sinks:
  • Vents, Heat Vents, Exhausts, Atmo Thrusters Radiators:
  • Any non-deformable blocks adjacent to heat sources or heat sinks Heat pipe networks:
  • All sorts of conveyors, Pipe blocks, Willis ducts for large grids
  • All sorts of conveyors, Neon tubes for small grids

Build, overclock, and try not to melt your ship 🔧🔥

Configuration guide with all the config options explained, hiding here: https://github.com/TheScrewUpTeam/SE-Heat-Management/blob/main/CONFIGURATION.md

🔧 Configuration

  • Located at:
%AppData%\SpaceEngineers\Saves[YourWorld]\Storage\TSUT_HeatManagement_Config.xml
  • Customize per-world: • Heat generation and transfer rates • Environmental influence • Critical/explosion temperatures • Pipe conductivity via
HEATPIPE_CONDUCTIVITY

• Event controller thresholds and triggers


🐞 Known Issues

Your ship may unexpectedly become a fireball. This is a feature, not a bug. 🔥💥


👷 Credits

  • Mod by TSUT (The Screw-Up Team)
  • Inspired by all the engineers who ever said: "What if batteries could explode?"

💬 Suggestions / Feedback

Got ideas? Found an issue? Want a variant version? Leave a comment or start a discussion — this mod is actively maintained! If you want to watch progress on this and other mods, join the Discord: https://discord.gg/zn3k8fP5Dz


Updates

v1.4.1: Compatibility fixes The mod got updated to be compatible with more mods and the Prosperity update. Mods that are no longer conflicting:

  • Production quota
  • Water Mod

v1.4.0: Component Architecture & O2 Rebuild

Huge thanks to @4peace for the idea that kicked this one off 🙏

  • Migrated to SE's native component model: more stable, better performance, especially on large grids and dedicated servers
  • O2 Distribution system fully rebuilt: more reliable across all configurations, HMS vents and satellite mods (like H2Real) benefit directly
  • All grid split/merge issues resolved: heat state now survives correctly
  • New debug tool: O2 connection overlay: see your O2 topology live
  • New extensibility API for satellite modders: extend HmsApi.AHmsBlockComponent, decorate with [MyEntityComponentDescriptor], SE auto-attaches it: no more factory registration or session wiring, and all thermodynamic power is at your fingertips right in that class

v1.3.3: Major fixes

  • The issue of godly temperatures building up is finally fixed.
  • The issue with the rover's antigravity has been fixed as well.
  • Added /HMS.toggleInspector command that activates the inspector more, allowing you to see the temperature of any block in real time without opening the terminal.
  • Other commands (dropTemp and refreshNetworks) now properly work in multiplayer

v1.3.2: O2 Distribution System

  • New O2 Distribution System: automatically manages oxygen across conveyor-connected blocks
  • O2 producers: Oxygen Farms now generate O2 for the network
  • O2 storage: O2 Tanks track and store available oxygen
  • Third-party mod support for O2 consumption
  • The new property is accessible for scripts. It's called HeatTemperature and is available on all affected blocks

v1.3.1: Heat transfer through connectors

  • One more method to transfer heat to other grids - through connectors.

v1.3.0: Heat transfer to subgrids

  • Heat transfer between subgrids through Rotos, Pistons, and Hinges.
  • Heat conductivity is on the HeatPipes level for all of those but regular rotors.

Stay cool, engineers! 😎

Видео автораОткрыть в YouTube ↗
Видео автораОткрыть в YouTube ↗
Оригинал в Steam Workshop

Как установить и запустить

Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.

Настройки cookies

Вы можете изменить выбор в любой момент. Отказ от аналитики не ограничивает доступ к сайту.

Технологии, провайдеры и сроки хранения