Поиск по STEAMB

Игры и программы по онлайну, скины по объёму продаж

Ничего не найдено

Попробуйте другое название или переключите категорию.

Меню

МодыNPC

MyCrew

Положительные голоса94%125 голосов игроков
Подписчики2,3 тыс.2 262 в Steam Workshop
Размер файла1,1 МБЗагрузка через Steam
Обновление автора3 нояб. 2025 г.Дата обновления материала
Изображение 1 из 1
Установить через Steam

О материале

«MyCrew» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Для установки откройте оригинал в Steam Workshop, проверьте требования автора и подпишитесь. Совместимость с версией игры редакцией не проверена.

Описание автора

Add a crew to your grid!

This mod brings some life in your space engineers world!

It is based on AI enabled, so please load this mod before! It is also compatible with some character mods.

REMARK: Work in progress, so please be honest in case something is not working!

How to get crew members

  1. Create a faction
  2. Build a base (or something mobile?) - large grid
  3. Setup an antenna, range at least 20000. Name it after a place that promise hope. Yavin4 or HomeOne are good names. They'll understand, everyone knows the movies.
  4. Even if the atmosphere may be breathable, I will build at least one room with an air ventilation system.
  5. Everybody needs at least one bed and, for emergencies, one cryo chamber.
  6. Be at a distance to the grid

See also the settings file in the save game directory.

  • Battle Stations: Build a terminal block (e.g. a light), name it BattleStations. If switched on, all hands to battle stations

  • Prepare for Hyperspace: Build a terminal block, name it HyperspaceAlert. If switched on, crew prepares for hyperspace

  • Use a terminal block named CommandCrewOfGrid. The one who is near the block when activated gets in command of the crew on the grid

  • Crew members belong to the faction of the owner of the grid on which the bed is built, faction change is not possible

  • If you rename a bed such that the bed name contains the crew member name, the crew member will be assigned to this bed This is also possible if the new bed is on another grid, if the grid is nearby (default min 500m) and of the same faction

  • In order to get a new crew member you need the conditions described in datapad 1. These conditions are not needed to maintain the crew on the grid.

  • Although the suit provides liquid food and other features, kitchen and toilets will make the crew happier

  • Crew members use consoles & other equipment to work while other seats & couches are used for recreation

  • Working hard is mandatory, but it is also essential to sometimes relief the pressure. Some music may help...

  • Check LCD apps for helpful status displays

  • (Do not use ladders! Game may crash!) Potentially solved, crew will not try to use ladders

  • In order to get a new crew member you need the conditions described in datapad 1 That is a faction, one bed and one cryo per crew member, pressurized vent, antenna named Yavin4 or HomeOne with >20km range, and potentially go to some distance to the antenna

  • To transfer crew members from one grid to another, the crew member must be within a certain distance of the new bed (default 500m)

  • You can transfer a crew member to a certain bed (also if not on the same grid but within the distance) by naming the bed such that the name contains the crew member name

  • In order to control assignment of the crew members you need several blocks, specifically named that can be turned on and off. E.g. lights

  • CommandCrewOfGrid: The one who is near the CommandCrewOfGrid block when activated gets in command of the crew on the grid (new owner). This enables the AI enabled commands.

  • AllowGridChangeDeparture & AllowGridChangeDestination: Both blocks on both grids must be activated to transfer crew members. But only if free beds and free cryos exist on the destination grid and it has a pressurized vent or at least one crew member. Only crew members without beds or switched off beds are transferred from the departure grid.

  • In case a crew member has lost bed and grid assignment, a grid with a free bed, a cryo chamber and a pressurized vent need to get within the above mentioned distance. Then the cre member will be assigned to the free bed on the grid

  • ExecuteCrewTranferToConnectedGrid & AllowGridChangeDestination: If the ExecuteCrewTranferToConnectedGrid block is activated all crew members are transferred to the first found grid with activated AllowGridChangeDestination block and that has beds and cryos even if they are not free. Crew members may behave odd when they have no bed assigned.

Оригинал в Steam Workshop

Как установить и запустить

Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.

Настройки cookies

Вы можете изменить выбор в любой момент. Отказ от аналитики не ограничивает доступ к сайту.

Технологии, провайдеры и сроки хранения