Поиск по STEAMB

Игры и программы по онлайну, скины по объёму продаж

Ничего не найдено

Попробуйте другое название или переключите категорию.

Меню

Скрипты

Self-Aligning Solar Panels For Ships With Gyros

Положительные голоса89%45 голосов игроков
Подписчики1,6 тыс.1 582 в Steam Workshop
Размер файла5,17 КБЗагрузка через Steam
Обновление автора20 янв. 2015 г.Дата обновления материала
Изображение 1 из 1
Установить через Steam

О материале

«Self-Aligning Solar Panels For Ships With Gyros» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.

Описание автора

At last, a fully automated probe script. With the start of a timer, this script can launch a ship, cut engines off at cruising speed to optimize power use, stop at the intended distance, and align its solar panels with the sun for maximum output before shutting off all non-essential systems. All with a single timer. A truly fire-and-forget probe script. If all you need is the solar panel alignment, all other features can easily be disabled.

Features: Self-aligning solar panels Adjustable minimum value for power (solar panel max of 120 kW, default set to 110 kW) Adjustable turn speed (higher numbers mean faster turns but also lower accuracy for alignment) Ability to turn off the timer when the panels have aligned Fully automated launch capability

Required for alignment: 1 Gyroscope 1 Solar panel 1 Programmable Block 1 Timer Block set for 2 sec. Have it run the Programmable Block and itself. Set the custom name below to have it turn off once alignment finishes. Freedom of Movement for the craft to rotate. Line of sight to the sun

Required for automated travel feature: At least 1 thruster to give forward thrust, containing the characters in the frontThrustKey variable. At least 1 thruster to give backward thrust, containing the characters in the rearThrustKey variable. At least 1 antenna matching the name in the antennaName variable.

Instructions for use:

  1. Make sure you have ownership of all parts needed.
  2. Turn on the features you want with the timerOff and probeLaunch variables below.
  3. Make sure that all of the names of the parts you will be using are properly set in the name variables below.
  4. Customize the turn speed and power needs for the solar panel alignment.
  5. If using the launch feature, set the distance you would like the probe to travel as the antenna range
  6. When the ship is ready to launch (if using the launch feature) or align (if not), start the timer and watch it go.

Notes:

  1. It works with a small ship but would need the minPwr value reduced to around 27 kW in the code.
  2. Make sure all solar panels are facing the same direction since it only references the first solar panel for sunlight calculations.
  3. The solar panel and gyro names are used as variable placeholders so don't change the names while the script is running. They will change back when it's done.
  4. The orientation of the gyroscope will affect performance. It should be on the floor or ceiling for correct alignment. The orientation shouldn't matter.

If you have any issues getting it to work correctly, just let me know and i'll try to hop on and help you out.

For the probe designed for this script, see the link below. Self-Aligning Solar Panel Antenna Probe

Оригинал в Steam Workshop

Как установить и запустить

Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.

Настройки cookies

Вы можете изменить выбор в любой момент. Отказ от аналитики не ограничивает доступ к сайту.

Технологии, провайдеры и сроки хранения