Поиск по STEAMB

Игры и программы по онлайну, скины по объёму продаж

Ничего не найдено

Попробуйте другое название или переключите категорию.

Меню

Скрипты

Graphical Quad Radar

Положительные голоса99%104 голосов игроков
Подписчики1,5 тыс.1 524 в Steam Workshop
Размер файла2,74 КБЗагрузка через Steam
Обновление автора5 февр. 2016 г.Дата обновления материала

Изображение 1 из 3. Материалы автора из Steam Workshop.

Изображение 1 из 3
Установить через Steam

О материале

«Graphical Quad Radar» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.

Описание автора

Functional radar ingame programming script that uses either sensors or remote control blocks mounted on a rotor. It works with or without sensor mods.

This is an updated version of my Graphical Sensor Radar: https://steamcommunity.com/sharedfiles/filedetails/?id=614618032

You need: 1 timer block 1 programming block 1 rotor 4 sensors / or 4 remote control blocks (you don't need all 8) 1 text panel

If you want to use sensors, make sure the script variable "remoteMode" is set to "false". If you want to use remote blocks, make sure the script variable "remoteMode" is set to "true".

Put x blocks on the rotor, and put the sensors or remotes on the top block pointing in all 4 directions. If you want to detect grids of your own grid size, or if you want to use remote blocks, it's important that the sensors or remotes are mounted far away from your grids center, so it doesn't detect itself. Otherwise you can just use sensors on a single block on the rotor and set them to detect different things than your stuff.

It's important to name the sensors or remotes depending on how they are oriented in relation to your grid when you first mount them on the rotor. Choose "show on hud" to see if it's correct.

Sensors option:

The default names are: "Sensor Front" "Sensor Right" "Sensor Back" "Sensor Left"

Set the Front Extent to your desired scanning range, but it's important that it's the same range on all 4. Set the Back Extent to 1m, Top and Bottom Extent to how far up and down you want to scan, and Left and Right Extent to 1m to avoid shape bending on the radar, or more to increase chances of detecting something. Set the detection types to what you want to detect. If you don't detect anything, try unselecting your own grid type.

Remote Control Blocks option:

The default names are: "Remote Control Front" "Remote Control Right" "Remote Control Back" "Remote Control Left"

No other block settings need to be set.

The other default names are: "Rotor" "Text panel"

Turn the rotor off and set it to ~10-20rpm, and the torque settings to ~75%. The faster it rotates, the less chance the sensors will pick up small objects at long range. Put the script in the programming block and edit / check the block names to match in the script. Set the timer to run the programming block and trigger itself with "TriggerNow", so the script runs many times per second. Set the text panel / LCD font size to 0.4. Trigger the timer block and turn the rotor on.

Оригинал в Steam Workshop

Как установить и запустить

Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.

Настройки cookies

Вы можете изменить выбор в любой момент. Отказ от аналитики не ограничивает доступ к сайту.

Технологии, провайдеры и сроки хранения