Dragonfly Ornithopter | Mechanized Flying Insect
Фото и видео: 1 из 7. Материалы автора из Steam Workshop.
О материале
«Dragonfly Ornithopter | Mechanized Flying Insect» — материал мастерской Space Engineers. Моды, чертежи кораблей, скрипты и миры для Space Engineers. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.
Описание автора
No mods. Made for creative.
Try to paste as close to the ground as possible.
Big thank you to ACG-_-R4G3 for flying the bug in the video!
Description:
An ornithopter is an aircraft which flies by using a flapping motion. After a small proof of concept to see if one could be made in SE, I decided to make this lovely bug. It is very tricky to fly, but rewarding. There are thrusters on each wing that will turn on when the wing is in a downward flapping motion, creating lift. The pistons were added because the wing rotors weren't strong enough to pull the wings down as the thrusters were trying to push it upwards.
This design is modeled after a Zoid concept created by MAETHIUS: http://maethiuspics.homestead.com/XZ-311-Hellstorm.html
Features:
- Mechanical Flapping/Flying
- Moving Legs
- 1 Gatling Gun
Flying Tips:
- Try not to fly 100m/s because the rotors lock.
- You have to keep constant control over the thruster override. Equilibrium flight is achieved around 60kN of thrust. If you want to fly higher or slow your decent to the ground, you need to increase the override. It is best to stay close to 60kN and only decrease or increase the thrust a little bit.
Comments are welcomed, enjoy!
Как установить и запустить
Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.