Поиск по STEAMB

Игры и программы по онлайну, скины по объёму продаж

Ничего не найдено

Попробуйте другое название или переключите категорию.

Меню

Здания

ANZ Tower

Положительные голоса97%279 голосов игроков
Подписчики23,3 тыс.23 343 в Steam Workshop
Размер файла12,37 МБЗагрузка через Steam
Обновление автора6 окт. 2020 г.Дата обновления материала

Изображение 1 из 16. Материалы автора из Steam Workshop.

Изображение 1 из 16
Установить через Steam

О материале

«ANZ Tower» — материал мастерской Cities: Skylines. Здания, дороги, транспорт и моды для первой Cities: Skylines. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.

Описание автора

The ANZ tower, also known as 161/163 Castlereagh St, or the ANZ Bank Centre, was completed in early 2013. This 193m tall recreation modifies the rear plaza a bit to work on flat surfaces.

This has a couple of notable features

  • the whole north-eastern facade (the crescent part) uses rotor shaders for its windows. This was mainly to preserve the visible columns that run up the building. I used this to display interior illumination, which gives it a bit more depth.
  • There is a penthouse on the top 2 floors of the building, with a rooftop balcony and terrace with pool. I toyed around with plopping some furniture props inside the penthouse but they stuck out a bit so I left it empty and put down some floorlights.
  • It includes an additive submesh. I'm aware that Ronyx explicitly recommends not using additive with building submeshes, but the faces are so close to other objects that as a prop they were fading no matter what setting I used. I removed the lines to delete the LOD and included an LOD and it seems to look okay. This submesh lights up the logo at the roof, backlights the logos at the street entrance, and illuminates the light sculpture in the rear plaza.

It is a 8x7 unique building, same stats as Deutsche Bank Place. I've included a RICO definition file to convert it into a ploppable office building if you use that, with 80 workplaces and 1 household (if that works).

Main mesh 15,617 tris / 341 LOD 4096x1024 / 256x256 LOD

Submesh (glass) 386 tris / no LOD 512x1024 / n/a

Submesh (additive) 650 / 550 LOD 512x128 / 128x32 LOD

Оригинал в Steam Workshop

Как установить и запустить

Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.

Настройки cookies

Вы можете изменить выбор в любой момент. Отказ от аналитики не ограничивает доступ к сайту.

Технологии, провайдеры и сроки хранения