Поиск по STEAMB

Игры и программы по онлайну, скины по объёму продаж

Ничего не найдено

Попробуйте другое название или переключите категорию.

Меню

Basic Airport Road Light Pack

Положительные голоса93%126 голосов игроков
Подписчики12,3 тыс.12 261 в Steam Workshop
Размер файла1,9 МБЗагрузка через Steam
Обновление автора26 июн. 2017 г.Дата обновления материала

Изображение 1 из 4. Материалы автора из Steam Workshop.

Изображение 1 из 4
Установить через Steam

О материале

«Basic Airport Road Light Pack» — материал мастерской Cities: Skylines. Здания, дороги, транспорт и моды для первой Cities: Skylines. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.

Описание автора

A baisc pack of airport road lights, which use the vanilla light effects. These are so that lights can be placed on airport roads without using the effects mod (coming soon), while using the airport road light remover mod https://steamcommunity.com/sharedfiles/filedetails/?id=952542692.

Performance: All assets share the same 64x64 diffuse and specular texture.

Content:

  • Basic Runway Light [50 Tris, 14 Tri LOD] - these are white and have a typical spacing of 60m

  • Basic Taxiway Light [35 Tris, 14 Tri LOD] - these are blue and have a typical spacing of 30m (except at corners and intersections)

  • Basic Taxiway Light Ground [28 Tris, 10 Tri LOD] - these are blue, and are placed in the pavement.

  • Runway Light Ground [28 Tris, 10 Tri LOD] - these are blue and are meant for Runway center lines

The lights should always be placed outside of the active pavement area (I didn't do that for the taxiways in the images attached). If there is a taxiway edge line, they can be placed on the other side of that. The ground level taxiway lights are meant for the crossable taxiway edge lines (double dashed lines), since planes can roll over them.

I recommend using the Prop-Line-Tool mod to place these.

Note: I am aware that the meshes don't look that great, but that was to reduce the tri count. You will most likely be unable to see the actual mesh unless you are in the first person mode.

Оригинал в Steam Workshop

Как установить и запустить

Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.

Настройки cookies

Вы можете изменить выбор в любой момент. Отказ от аналитики не ограничивает доступ к сайту.

Технологии, провайдеры и сроки хранения