ECy 5832 Camper / RV

LUXURY RV WITH THREE SLIDEOUTS - WORK IN PROGRESS

Obviously something changed in the mods, as I can no longer deploy the car due to 'missing mods' ... if anybody can give me a hint about what changed in the linked mods, I'd be grateful!

New luxury RV, based on a heavy duty truck. Complete overhaul to lose the 'truck look'.

Three sliedouts (left, right, back) on the lower floor to maximize space. Once you enter, you'll see a 'throttle lever' switch to your right - this one will unfold the car :)

Kitchen with adjacent dining table; large fridge behind the driver's seat.

Left slideout houses the bathroom. Red signal on bathroom door lights once you turn on the bathroom lights.

Rear slideout holds four chairs to spend the evening in. There is a 'home theater mode' switch between the rearmost seats. It turns off the lights, folds out a big-donkey screen and swivels the seats to give you a good view.

The upper floor is mostly empty (save for some beds) in this early stage - actually, there is so much room we still haven't figured out what luxury to put there. Since this is a work in progress, please leave your suggestions for what you'd like to see on the upper floor! We'll probably use the rear slideout as a balcony, though ;)

The stairs are somewhat finnicky. If you stay in the center of the stairs, you will be able to walk up without problems, though.

CONTROLS

The usual stuff, I'd say:

[1] - door [2] - unfold/fold [3] - driving light [4] - blinker left [5] - blinker right [6] - horn [7] - fog lights

WORK IN PROGRESS

Do read the change news regularly :)

Please leave comments or suggestions so we can incorporate your feedback!

'JAMMING BUG' WARNING

As usual, the vehicle is subject to the jamming bug I have mentioned again and again (and I really hope Axolot fixes this soon, soon, soon!). The TL;DR version: Everything works fine, and then all of a sudden performance tanks and some moving parts won't budge (doors, slideouts etc.). Solution: paint a block on various parts of the model (usually the parts that are supposed to move).

This model in particular often exhibits this bug right after deploying. You know when this happened when you see the suspension all compressed and the wheels grinding the wheelhouses. Just put it on the lift, then remove the lift and you should be fine.

Model easily runs at 60+ fps (usually > 90) for me until the jamming bug hits.