Automatic Bowling

This is a 100% automated bowling alley that resets the pins. It barely lags when welded down but when it is dropping the pins down it lags and the screen will warn you when it is about to lag and a loading bar will pop up telling you the progress of setting the pins and you have 2 shots before the pins are cleared and it will tell you if you get a strike or spare and the pins left up are on the screen.

============Important========= -Be sure to break all red barrier blocks before using any part of the bowling alley. -The green switch is power. -The yellow button is to clear any balls in the pit in the back (if it does not get pushed out) but after shooting a ball it should automatically do that. -The red button is to clear the pins and reset them. -If a ball or pin gets stuck in the gutter you will need to hit it into the pit in the back. -If you need to get to the logic or loading area flip the switch under the right pin to open the door. -If you need to replace pins they need to be 4 pipes tall and full white. -Only shoot when the green light is on and it does not say WAIT on the screen.

===========Other============= -You can get more bowling balls or pins from my workshop if you need more but it may cause problems if you have too many extra balls or pins. -If you find any problems with this bowling alley please tell me in the comments. -Also, if you have an suggestions on how to improve this or suggestions for new projects please tell me.

==========Updates============ -Fixed paint. -Fixed the ball ramp so it actually tilts down.

=====Problems I am aware of===== -The screen glitches in multiple occasions -Things often bounce off the backboard and get stuck -Pins and bowling balls usually get stuck on the wheels in the gutters -Pins almost always get stuck in the feeder -Bowled balls are rarely ever counted (the game goes on forever, all pins down is always counted as a strike, the ball is never returned automatically)

Please let me know of any issues that are not listed above.