Manta Ray Turbo [no mods/with glitches]

The Manta Ray Turbo is a racing hovercraft.

Features

• 2 modes: fly close to the ground or freely through the sky

• 2 Seats. The passenger seat has the same buttons as the main seat but can't steer. This makes for some interesting co-op racing!

• Vehicle can be flown in first person mode

• An automatic gyroscope repair system that will detect and correct a broken gyroscope. Park it on a levelled surface to make it repair itself. You'll hear it making a crackling sound while calibrating.

Controls

• WSAD steering

Hotkeys These buttons are arranged to be easily controlled with the numpad. To do that you'll have to map the secondary hotbar hotkeys to those numpad buttons in the menu. Tip: Put the camera on Follow mode and don't use the mouse.

1. Strafe left

2. Boost

3. Strafe right

4. Go down

5. Go up - When pressed when leaving ground-range will switch the vehicle to float-mode preventing it from falling back down. This mode will deactivate again upon entering ground-range.

6. Main hover thrusters (on/off)

7. Horn

8. Radio

Technical info

• Stabilized gyroscope with full flexibility and no dead zones. The gyroscope is used when the vehicle is up in the air. On the ground it only uses downward pointed sensors for balancing.

• My Omnidirectional Steering Module is used for steering and gyroscopic balancing

• An automatic gyroscope repair system. Whenever a surface is within 1 block reach at all 4 corners the repair system will kick in.

• Uses my 2-axis angular accelerometer to cancel out accidental fast tilting movements and to disable too fast gyroscopic corrections.

• Whenever one of the corner's sensor gets out of ground range a timer is used to disable their local thrusters for 200ms. This helps in keeping the vehicle low to the ground. A similar timer is used for whenever all 4 sensors get out of range simultaneously turning all thrusters 200ms off at once.

• Uses my heavy duty WS converter

• Lots and lots and LOTS of blueprint editing using Brent Batch's Advanced Blueprint Tools

Creator: Tomatsu