Поиск по STEAMB

Игры по онлайну и скины по объёму продаж

Ничего не найдено

Попробуйте другое название или переключите категорию.

Меню

Постройки

Schwarzkopf Polyp

Положительные голоса77%13 голосов игроков
Подписчики1,3 тыс.1 306 в Steam Workshop
Размер файла1,36 МБЗагрузка через Steam
Обновление автора1 июл. 2019 г.Дата обновления материала
Schwarzkopf Polyp

Изображение 1 из 5. Материалы автора из Steam Workshop.

Добавить в игру через Steam

  1. Перейдите в Steam

    Откроется страница именно этого материала.

    Открыть в Steam Workshop
  2. Нажмите «Подписаться»

    На странице Steam войдите в аккаунт, если потребуется.

    Подписаться

О материале

«Schwarzkopf Polyp» — материал мастерской Scrap Mechanic. Постройки, новые блоки, детали и игровые режимы. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.

Описание автора

Schwarzkopf Polyp with a Beach theming. Built by : Yasu and Dennis(Coastergalaxyworld)

Controls :

Main Panel : You will see six green buttons. Think of them in three vertical rows. The upper one increases the speed, the lower one decreases it. Row 1 will change the speed of the four arms. Row 2 will change the speed of the arm bobbing. (If Arrow button is pressed) Row 3 will change the speed of the four gondola crosses.

Then there is an Arrow button. It is connected to a T-Flip flop and will act like a switch. Press it once to lift up the arms. Increase the bobbing speed by pressing the upper button on row two. Press the button again and the arms will lower again.

The yellow button is a horn that usually signals that the ride is starting or stopping. In this case, it does NOT affect the ride and is completely cosmetic.

The red, big emergency button puts every speed to 0, completely stopping the ride.

There is a monitor on the ceiling which will show you the current speed of different parts of the ride.

A - Arm - rotation of the main body E - Extender - bobbing arms K - Kreuz (german for corss) - gondola crosses

Secondary Panel : The four switches on the secondary panel are for lights.

  1. Switch turns the small lights on, which will flash in a wave pattern that hanges over time.
  2. Switch will turn on the front and back lights of the gondola.
  3. Switch will turn on the flood lights, which will change colors every few seconds. Red -> Blue -> Green
  4. Switch will turn on the strobe lights. When the 3rd switch is pressed, the flood lights will automatically turn off when the strobe is activated. (IMPORTANT ADVICE : Do NOT use the strobes for a long period of time, as it can cause a headache for riders or bystanders. ;D )

Mod List : The Modpack Polygons The Modpack Polygons Ultralight The Modpack Polygons Glass The Modpack BETA The Modpack Legacy The Modpack Car Interior Parts by Lord Pain Interactive Parts by Lord Pain Additional Pipes by Lord Pain Slim Logic Gate Entrance Doors Pack Metrostroi Content More Pistons Mod / Power Pistons Scrap Letters X's Detail Mod Buttons and Switches'

Theres 23,963 individual blocks in this build.

-------DO NOT REPOST THIS CREATION IN THE WORKSHOP------- -------RECOLORING THE RIDE IS PROHIBITED WITHOUT OUR PERMISSION-------

TAGS : Polyp Kirmes Fahrgeschäft Ride Flatride Kermis Fair Funfair

Оригинал в Steam Workshop

Как установить и запустить

Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.

Настройки cookies

Вы можете изменить выбор в любой момент. Отказ от аналитики не ограничивает доступ к сайту.

Технологии, провайдеры и сроки хранения