Поиск по STEAMB

Игры по онлайну и скины по объёму продаж

Ничего не найдено

Попробуйте другое название или переключите категорию.

Меню

Постройки

Class 91 Train LNER Locomotive

Положительные голоса92%13 голосов игроков
Подписчики1,1 тыс.1 130 в Steam Workshop
Размер файла209,32 КБЗагрузка через Steam
Обновление автора22 авг. 2019 г.Дата обновления материала
Class 91 Train LNER Locomotive

Изображение 1 из 12. Материалы автора из Steam Workshop.

Добавить в игру через Steam

  1. Перейдите в Steam

    Откроется страница именно этого материала.

    Открыть в Steam Workshop
  2. Нажмите «Подписаться»

    На странице Steam войдите в аккаунт, если потребуется.

    Подписаться

О материале

«Class 91 Train LNER Locomotive» — материал мастерской Scrap Mechanic. Постройки, новые блоки, детали и игровые режимы. Данные Steam, описание автора и ссылка для установки через подписку. Совместимость редакцией не проверена.

Описание автора

Hi, this is my new train creation, based on the BR Class 91 Locomotive, in the LNER (Ex-VTEC) livery. This locomotive is powered (in real life) by overhead lines, and the creation features a controllable pantograph and line-voltage indicator to simulate this.

Features of the class 91: -Fully operational interior and exterior lighting -Operational pantograph -2 bogies, each with 4 wheels and suspension -Powered through thrusters -Working wipers on rear cab windows -Cab setup procedure, featuring AWS self-test* -Locomotive can be driven from either end (2 cabs), the rear cab is not normally driven from and can be connected to mk4 coaches

Cab Setup Procedure for 91:

  1. Turn the masterkey (key 7). This will initiate a 3-second AWS self-test sequence. (In real life, this has to be acknowledged, however in game wait 3 seconds and the alarm will stop).
  2. Setup lighting in both cabs as desired (key 4 = headlights, key 5 = tail lights, key 9 = cab lights)
  3. Set reverser to desired direction (key 3) (ON = Forwards, OFF = Reverse)
  4. Raise the pantograph (key 6 (toggle)). Once raised, the white line voltage light will light.
  5. Control the train using throttle and brake (keys 1 and 2 respectively), and the horn using key 8.
  6. Wipers can be activitated (in the rear cab only) using key 0.

When exiting a cab of 91:

  1. Ensure throttle and brake are off and the train is stationary
  2. Lower the pantograph (optional)
  3. Turn off lights (or leave tail lights on)
  4. Turn off the master key
  5. Turn off the cab lights (optional)
  6. Wait at least 3 seconds before entering a cab again (due to AWS* logic)

Controls of 91:

  1. Throttle
  2. Brake
  3. Reverser (ON = FORWARD; OFF = REVERSE)
  4. Headlight switch
  5. Tailight switch
  6. Pantograph Toggle Switch
  7. Master Key Toggle
  8. Horn
  9. Cab Lights
  10. Wipers (Rear cab only).

Note(s): -There are two unassigned switches on the left side of each cab which can be used to control passenger doors if coaches are connected. -You can connect more thrusters (provided in centre of loco) to increase speed.

Link(s): -First Class Mk4 carriage: https://steamcommunity.com/sharedfiles/filedetails/?id=1844316811 -East Coast liveried class 91: https://steamcommunity.com/sharedfiles/filedetails/?edit=true&id=1844988075

Enjoy!

*AWS (Automatic Warning System) only operational during start up.

Оригинал в Steam Workshop

Как установить и запустить

Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.

Настройки cookies

Вы можете изменить выбор в любой момент. Отказ от аналитики не ограничивает доступ к сайту.

Технологии, провайдеры и сроки хранения