Survival GyroTipJet Flyer (No Mods, Glitchless)

Warning! This GyroTipJet is meant to be built in Survival Mode where the weights of some Parts are different. As a result, it does not fly very well in creative Mode. To test a GyroTipJet like this in Creative Mode check out: https://steamcommunity.com/sharedfiles/filedetails/?id=2153050655

Controls: 1: Up 2: Down 3: Fly W: Forward A+W: Left D+W: Right

Explanation: A GyroTipJet is a new glitch less flight vehicle for vanilla Scrap Mechanic. The Rotor part is perfectly balanced and acts as a gyro which also provides Lift. It is connected to the main body such that no angular Momentum is transferred, keeping the gyro always aligned. The main body hangs down from the gyro and can swing back to a level position when tilted. Many GyroTipJet designs are possible, however, to reduce weight and cost here the middle thruster is used for both forward acceleration and turning.

Part List: 3 Thruster Level 5 1 Controller Level 5 1 Driver's Saddle Level 5 4 Piston Level 5 1 Gas Container (instead of the red blocks) 3 Logic Gate 2 Button 1 Switch 9 Bearing 8 Wood Block 2 (maybe Solid Net Block instead in the Future) 22 Small Pipe Short 2 Small Pipe Long 16 Small Pipe Bend 5 Small Pipe Tee 1 Small Pipe Five Way

Building Notes: -Connect the gas container to every thruster -The bearing from the saddle can be left on default settings -Most bearings need to be flipped -All parts need to be on level 5 to reduce weight -The logic gates are connected in a Loop