Dornier Do X

The Dornier Do X was used from 1929 to 1937, and when it was originally built it was the largest flying boat at the time.

No mods were used to make this plane, but it does use some glitch welding.

The plane has a total of 12 engines, each having 9 cylinders.

W - Pitch Down A - Roll Left S - Pitch Up D - Roll Right 1 - Yaw Left 2 - Full Throttle 3 - Yaw Right 4 - Half Throttle 5 - Idle

Startup Procedure: 1: Get in the plane's pilot seat, and set the engines to idle, by pressing 5. 2: Get out of the seat, and on top of the plane. When getting out of the set, it may put you on top of the plane, but if it puts you back in the cockpit, open the hatch on the top to get out. 3A: To manually start the engines, you do it by hitting each of the props with your hammer, making sure that you hit them to go clockwise. They will continue to spin. 3B: To quickly start the engines, you do it by pressing the button on top of the hatch. 4: Open up the hatch on the cockpit (if not already open), and get in. Then make sure to close the hatch. 5: Fly the plane! If you set it to half throttle, it's really good for taxiing in the water. When trying to take off, get a good stretch of water, set it to full throttle, gain some speed, and pull up a bit. The plane may take some time to pull out of the water.

Video Demonstration: https://www.youtube.com/watch?v=NgrUeSCSkuU