Liebherr LTM 1350 Mobile Crane - With Manual Support Legs

Liebherr LTM 1350 Mobile Crane - With manual support legs

*The LTM 1350 sets standards in the 6-axle class with outstanding load capacities and boom lengths. The Liebherr LTM 1350 is a powerful mobile hydraulic crane. It comes standard with a maximum lift capacity of 386 tons.

The electro-hydraulic, active rear wheel steering makes even tight corners child’s play. Overall, it features many of our outstanding technologies to ensure reliable, safe and economical crane operation.

This is the version of LTM 1350 that does not have automatic support legs. The reason to that is that the fps drop more with that installed and the version without it also can be welded to the ground. And also i think it's is quite fun that you can assemble the various parts of the crane manually. Even lift the parts down to the ground from the cargo space with the crane itself. See what i mean in this video: https://youtu.be/_6kzEVcXcEY

It takes a little work and patience to operate the mobile crane. In this video you can see how to setup the crane equipment correctly: https://youtu.be/wN4Pq0mqgu8 *

If you want to try the version with automatic support legs you can do so here: Liebherr LTM 1350 With automatic support legs

Or if you want to try the fully assembled overkill version with extension boom you can do that here: Liebherr LTM 1350 - With Extension Boom

I have spent an extreme amount of time and patience on this build. I hope you will have fun with it and maybe give it a thumbs up and make it your favorite! /Robb 😎

CONTROLS

Driver Seat WSAD for steering and driving 1 > Lock wheels 2 > Terrain mode 3 > + 4 > Lights 5 > Reverse camera 6 > Right side camera

Remeber to loose the hook in the front before operating the crane.

Operating Crane Seat 1 1 > Boom up 2 > Boom down 3 > Cranearm in 4 > Cranearm out 5 > Hook down 6 > Hook up 7 > + 8 > Camera 9 > + 10 > AD > Rotating crane WS > Rotating hook

Operating Crane Seat 2 1 > Boom up&down fast gear 2 > Boom up&down slow gear 3 > Cranearm out&in fast gear 4 > Cranearm out&in slow gear 5 > Reset 6 > Start engin and work-light 7 > Emergency release of the hook

---

Thanks to DerNiepe for the help! ^^