Поиск по STEAMB

Игры и программы по онлайну, скины по объёму продаж

Ничего не найдено

Попробуйте другое название или переключите категорию.

Меню

Постройки

MÁV Btx-009 Control Car

Положительные голосаНет данныхНет данных о голосах
Подписчики2828 в Steam Workshop
Размер файла364,7 КБЗагрузка через Steam
Обновление автора30 сент. 2026 г.Дата обновления материала

Изображение 1 из 13. Материалы автора из Steam Workshop.

Изображение 1 из 13
Установить через Steam

О материале

«MÁV Btx-009 Control Car» — материал мастерской Scrap Mechanic. Постройки, новые блоки, детали и игровые режимы. Для установки откройте оригинал в Steam Workshop, проверьте требования автора и подпишитесь. Совместимость с версией игры редакцией не проверена.

Описание автора

7U Gauge!

SYNCHRONOUS CONTROL WITH MDA ENGINE CAR!!! (Instructions at the bottom)

The Btx (or Batx) control car made for the MDmot multiple unit train by Ganz-Mávag.

Controls: W/S Converter: Increase/Decrease speed

  1. Headlights
  2. Backup Lights
  3. Close Cabin Door
  4. Horn
  5. Start Engine

Credits: W/S Converter made by: David Baguetta


Instructions for linking up engine to the Btx control car:

  1. Get MDmot on the lift
  2. Choose either coupler of your choosing
  3. Put 2 blocks (for turning radius reasons) on the coupler
  4. Weld the Btx Control Car on the coupler
  5. Link up the color coded logic gates located around the couplers with connection tool like this (left to right): Engine Car <--> Control Car Darkest red --> Darkest red Dark grey <-- Dark grey Light yellow <-- Light yellow Dark red(mid) <-- Dark red Light red <-- Light red Light green <-- Light green Dark yellow --> Dark yellow (If confusing see the picture on the workshop page:) You can put as many passenger cars between the engine car and the control car as you wish. the controls will work as long as it is one welded unit.

NOTICE: This car is unpredictable when welded. Due to some error in the game, when welding the control car to the engine, the wonky bearing on the engine is likely to get an invalid joint position for no valid reason. If that happens, delete the Btx and reweld from a different angle until the bearing stays in line with the engine powered bearing!

Оригинал в Steam Workshop

Как установить и запустить

Откройте оригинальную страницу в Steam Workshop, проверьте версию игры, зависимости и порядок загрузки в описании автора. Нажмите «Подписаться» и дождитесь загрузки Steam. Включите материал в меню модификаций или контента игры, если это требуется. Совместимость и запуск редакцией не проверены.

Настройки cookies

Вы можете изменить выбор в любой момент. Отказ от аналитики не ограничивает доступ к сайту.

Технологии, провайдеры и сроки хранения