Woody-Car FullyLights

Builder: DerYellowCap Construction period: vehicle / suspension 3 hours / technology inside 7 hours

The vehicle is to be used and released for YOUTUBER to introduce.

"" "Attention: Reload again without reference to me the builder is FORBIDDEN !!!" ""

On the idea for this project I came through a video about light control from Durf. The control of the brake lights and the reversing light have been taken over from this video with structural changes.

Manual switches: From the driver's door into the vehicle, see the sky (above). Front switch = bonnet Switch behind it = tailgate When the passenger door is open, the switch for the roof is in the footwell and the red switch on the center console is the WARNBLINK system.

Note: When loading the vehicle, first reset the indicator (driver's button 3, or press the white button in the engine compartment on the right)!

Driver's seat: WASD driving and steering 1: (switch) = driver's door 2: (button) = turn signal left 3: (button) = Turn off the turn signal manually 4: (button) = turn signal right 5: (switch) = low beam 6: (switch) = main beam only in function with beam 7: (switch) = foggy and fog light only with beam 8: (switch) = Open roof 9: (button) = horn 10: (switch) = warning light

All other seats: 1: (switch) = door

Automatic circuits: As soon as you turn into the curve, the turn signal goes on and turns off after 4 seconds. If you push "S" at full speed, the brake lights go on. If the vehicle is slow enough and the wheels start turning backwards, the backlight starts.

Have fun testing and playing!

DYC / DerYellowCap