Bedford VAL 14 Harrington Legionnaire - Italian Job

READ THIS BEFORE USING: Due to Brick Rigs being Brick Rigs and rear door construction, this vehicle may need couple tries when respawning due to actuators glitching and interfering in rear. While deploying ramp you may also spot some actuator glitching BUT deployed ramp is stable (tested in MP).

(minis not included)

Bedford VAL was a family of three-axle buses with 2 front axle steering and rear axle driven (so called chinese six). This particular one was built in 1964 and modified for the use in 1969 film „Italian Job”. After the film it was converted back to normal and used till 1990s as regular intercity coach in Scotland.

This model is over 1000 bricks and is for use in cinematic scenes (brick count is high because I made detailed undercarriage).

Controls:

• L - lights
• Q - foglights
• mouse1/mouse2 - indicators
• right button - wipers
• left button - interior lights
• H - Horn
• I - rear door
• X - ramp range
• pgdn/pgup - ramp angle
• num3 - disengage ramps
• alt W/S - passenger door
• E/Q on hinge - driver's door and sunroofs

Deploying a ramp:

1. press I to open doors
2. press X to engage ramp
3. press and hold page down until desired angle is reached (you can correct it using pgup in case you screw up) 3,5) it is advised for ramp to be angled as much as you can without lifting rear axle (just so the ramp „scratches” against the road)
4. load Minis (Best ones are those made by Cheko, he should release them soon and I will link them as soon as he does it)
5. after loading is complete press num 3 and let ramps fall
6. press X to withdraw glitching actuator back on standby place
7. press I to close the doors

Changelog: Update 1 (7 VI 2020) - remade interior because I'm a bloody idiot who forgot to check irl pics