Nuclear Plant Controller 2.0

Discrete based nuclear plant controller

** Temperature Control** This plant manages the temperature to be 50% at all time. It even works with any fuel type and or combination. Nevertheless, it might overheat for 1 second to adjust when putting in a new fuel rod.

** Turbine output Control** Even the turbine is managed in this design. With the use of regular direct feed-through of the load in combination with a simple proportional controller response of the system is almost instant. I say almost, since it due to the way reactors interpolate the actual system load, achieving instant response to the actual system load is near impossible.

** Battery Pack** The design comes with an efficient build in battery pack. it uses an PI controller to manage the reactor load. Use this inbetween your plant and devices if you do not have surge protection on your network.

** Direct connection to devices** It is possible to connect this device to your grid with just one junction box. Although this will give quite a decent response to the grid, it will damage junction boxes with overvoltage if no surge protector is used for devices that have high power loads.

** Displays** The design also comes with some handy displays to help u understand what is happening.

** Issues? ** If u have any issues: send a message below