Modular Reactor Complex

A reactor complex build originally designed to go straight into the ESV Prometheus, but after popular demand for its release on its own here it is!

There's a built in checklist to make sure it can be seamlessly integrated into your submarines, all I ask is you give credit somewhere in your subs description.

-REACTOR INFORMATION-

This reactor functions differently than any other reactor in Barotrauma. It requires constant feedwater via a coolant pump, (any pump placed in an easily accessible part of the sub will do, just remember to follow the checklist for wiring instructions,) and if this pump breaks, the reactor will overheat. The control rods used to SCRAM the Reactor CANNOT be inserted if the reactors pressure is too high, which will happen with a loss of coolant or overheat.

-SCRAM PROCEDURE-

1. Verify & Communicate Reactor Overheat to your crew.

2. Open Release Valves 1 & 2, found in the center of the Reactor Schematic Panel.

3. After approx. 10 seconds, verify reactor pressure enunciator light has switched from "PRES HI" to "PRES LO"

4. Press "REACTOR SCRAM" button on the Reactor Control Panel.

5. In the event of a safe SCRAM, the system will readout a confirmation message and the event time via the chat.